UHPLC and HPLC Products & Reviews

HPLC Valves

Double-beam, variable wavelength capability Programmable wavelengths: 190 - 900 nm East-to-use Control Pad Available Lamp startup/shutdown Pre-aligned lamps for easy changeover Remote autozero capability Optimized for use with ESA Coulometric electrochemical detection Low noise and low drift for increasing sensitivity and stability in analyses. The Model 526/528 detectors provide extremely low operating noise levels…

A low volume electrochemical cell optimized for the low flow rates of electrospray ionization mass spectrometry (ESI-MS). • Optimized for incorporation into low flow rate LC-MS applications • Provides high efficiency electrochemical conversion with minimal peak dispersion Proven Coulometric DesignThe Model 5030 Cell utilizes the proven porous graphite flow through design pioneered by ESA and is optimized for incorporation…

Pays for itself after just 2 months use! SolventTrak is a solvent conservation system designed to recycle uncontaminated solvents used in isocratic HPLC systems. In most systems much of the mobile phase can be recycled and reused. This saves money by reducing solvent consumption and the need for solvent disposal. Key benefits: Unique peak detection algorithm accurately defines peaks and diverts them to waste Installs ea…

Acheive Faster HPLCOnyx monolithic silica-based HPLC columns are designed for high-throughput analysis and the direct injection of dirty or viscous samples. Reduce run times with extremely high flow rates (up to 9 mL/min) "Dilute-and-Shoot” dirty biological samples Scalable from capillary to semi-prep column dimensions Onyx columns deliver high efficiency separations and can be coupled together in series to produce the extreme…

Guaranteed, Longest Lasting Preparative HPLC and SFC Column

Now available The Paraytec ActiPix D100 UV imaging detector is now available for purchase. This keenly awaited product is set to transform UV-Vis detection technology with its increased sensitivity, minute sample requirements and wide dynamic range - unlocking completely new applications for UV-Vis absorbance detection and greatly enhancing existing applications. Key Product Features - Miniature UV detector that can be placed…

Eshmuno® CPX media - High aggregate removal efficiency combined with high dynamic binding capacity Eshmuno® CPX media is a strong cation exchanger built on the proven Eshmuno® resin technology. Eshmuno® CPX media combines high aggregate removal efficiency in downstream purification linked to an outstanding high dynamic binding capacity, utilizing the 50 μm Eshmuno® base bead technology and EMD Millipore’s proprietary tentacle…

The LaChromUltra® U-HPLC System, in combination with the TQ Detector, provides unmatched quantitative analysis and characterization capabilities. Features • Seamless integration of the U-HPLC system and the TQ Detector with Empower™ 2 control • Performs SIR, MRM, Product, Precursor, and Neutral Loss Scans on the U-HPLC timescale • Equipped with dual ESI/APCI source as standard, with optional APPI available • 20 ms polarity swi…

The Hitachi HPLC Primaide is designed for long-term, stable operation, and features both high reliability and great durability. It offers tremendous capability for everyday analysis.Based on over 50 years of experience in the development and production of HPLC systems, Hitachi proudly introduces the Primaide. Make the most of your analytical equipment with Hitachi as the “Prime Aide” in your lab! Modules • Primaide 1110 Pump w…

This new zwitterionic stationary phase with phosphorylcholine functional group provides you with complementary selectivity for easier method development for substances that have been difficult to separate by previous types of HPLC columns operated in reversed-phase or HILIC mode. The selectivity features of SeQuant® ZIC®-cHILIC are especially beneficial for negatively charged polar compounds such as nucleotides and organic…

LyoSpeed™ delivers exceptional results with even the most difficult samples. When working with certain solvents, e.g. HPLC solvents, a fully dried result can be hard to achieve due to interactions with the dissolved sample - resulting in the formation of a gum or oil.In response to customer demand Genevac have developed a Fast Lyophilisation, or LyoSpeed™ process to resolve these problems for customers working with HPLC solve…

Fast separation of pharma samples: 10 compounds in 2 minutes.   As in all industries, greater productivity has become increasingly important in the field of pharmaceuticals. Consequently, there is a growing demand for fast and ultra-fast separations as well as higher sample throughput. To answer these requirements, Merck Millipore offers the perfect combination for separation speed and peak symmetry: Purospher® STAR UHPL…

Chromabolt™ is a family of pre-validated columns prepacked with EMD Millipore chromatography resins, designed for early clinical stage manufacturing. Available in 3 sizes – 10, 20 and 32 cm inner diameter (i.d.), these prepacked columns free up end users valuable time and resources by eliminating manual packing and cleaning. With Chromabolt™ prepacked columns, you can spend your time on manufacturing your products and not on…

Eshmuno® A is a rigid, high capacity Protein A affinity chromatography resin for the purification of Fc-containing proteins, including but not limited to monoclonal antibodies. Eshmuno® A resin can be cleaned and sanitized under acid and alkaline conditions while maintaining high dynamic binding capacity at high flow rates.The Eshmuno® A resin contains a EMD Millipore proprietary ligand. This ligand is recombinantely expresse…

The PDS-100 is a Programmable Dispensing System which uses precision stepper motors to control FMI “Q” and “RH” pump models including STQP, STQ, STH, & STRH in all piston sizes. The FMI pumps are integrally mounted to the programmable controller. The controller contains the stepper motors and driver electronics, and is a rugged anodized aluminum design. Several single and dual pump configurations are available including a dua…

PiP Pumps micro π-petter - Pipetting, Syringing and Diluting Ideal for repetitive and volumetric dispensing of acids, solvents and aqueous solutions.   Model "PiP" Precision Dilutor Features: FMI's unique low dead-volume pump heads, and synchronous motor drives. Can act as a single shot dispenser using the hand/foot switch or as a single metering pump in the continuous mode. Using a combination of forwar…

Ideal for Analyzers, Environmental Sampling & Injection, & Low Current Remote Battery Operation Model QBG Low Current DC Features: Ideal for extended 12/24 volt battery operation in remote locations. They are rated 60 RPM at 12 VDC and 120 RPM at 24 VDC. One Moving Part - NO VALVES! Low Current DC Operation Self Priming Patented CeramPump® Design

With a choice of over 40 different phases (and we continue to develop additional, unique and powerful HPLC sorbents) our SiliaChrom series of HPLC columns surely has the reversed or normal phase you need for your application.Mostly made from a silica-based sorbent, we carefully monitor the manufacturing process, from raw material synthesis to packing, ensuring you that our HPLC columns are of the highest quality.All columns ar…

For two decades, SiliCycle has been dedicated to silica gel manufacturing and has achieved a strong know-how and recognized expertise in this field. Furthermore, to support the increasing demand of our spherical silica gels, we have developed and optimized a highly controlled, large-scale, production process for all our SiliaSphere products, without compromising silica quality. SiliaSphere silica gels are manufactured from a…

The Thermo Scientific™ Acclaim™ Trinity™ P2 column is a high-performance, silica-based column specifically designed for separation of pharmaceutical mono- and multi-valent counterions by high-performance liquid chromatography (HPLC). This column was engineered for analytical chemists who need simple, robust, fast, generic methods. The Acclaim Trinity P2 columns provide an effective solution for counterion analysis using one co…

SpeedCore is the very latest in core-shell technology for use in HPLC and UHPLC. Designed to offer enhanced efficiency, speed and resolution of analysis. Speedcore C18 is designed to provide characteristics which will enhance method development. It provides the ability to obtain sharp peak shapes whilst retaining and separating a wide variety of compounds both hydrophobic and hydrophilic.SpeedCore C18 Features: C18 Hydroph…

HT4000L is an HPLC autosampler for high presise injection into HPLC, UHPLC, LC/MS and IC systems. HT4000L is lab automation ready. In fact HT4000L besides working as a standard HPLC autosampler, can take care of many sample preparation tasks as no standard autosampler has been able to assist up to now. Basic sample preparation capabilities includes dilution, precolumn derivatization, pH spiking and internal standard addition…

HT310L is a cost-effective HPLC autosampler, that offers automation for processing up to 10 unattended samples. By its competitive pricing is the alternative to the manual injector for users that cares about reproducibility and accuracy. HT310L fits every HPLC system, and its direct syringe injection minimizes dead volume, reduces carry-over and improves repeatability. Full and partial loop are both performed with very accura…

BIOshell™ A160 Peptide C18, 2.7 μm HPLC Columns BIOshell A160 Peptide C18 columns packed with 2.7 μm particles, 160 Å pores, are as efficient as sub-2-μm porous particles, but at ½ the backpressure.These columns can be operated long term at pressures up to 600 bar (60 MPa or 8500 psi), temperatures up to 90 °C and within the pH range of 1 to 8. BIOshell A160 Peptide C18 columns can be run on all HPLC systems including UHPLC s…