Products & Reviews

This 10 mL PYREX® Dean Stark distilling receiver is graduated from 0 to 1 mL in 0.1 mL intervals, with a maximum scale error of 0.05 mL. The graduation intervals from 1.0 to 10.0 mL are 0.2 mL, with a maximum scale error of 0.1 mL. Reference: ASTM E-123.

These reusable 1 mL PYREX® glass pipets are color-coded by size for easy identification and sorting. Colored graduations are enameled onto the glass. The graduation intervals on these pipets are 0.1 mL They are calibrated "to deliver" (TD) their total capacity without blow-out. Reference: ASTM E-1293."

These disposable 10 mL PYREX® glass pipets are calibrated (TD) with blow-out and offer long, slender, tapered tips to make pipetting go faster and easier. All pipets have negative graduations and fire polished tips for burr-free, even flow rates. Nonsterile, unplugged and bulk packed. Reference: ASTM E-714.

These disposable 1 mL PYREX® glass pipets are calibrated (TD) with blow-out and offer long, slender, tapered tips to make pipetting go faster and easier. All pipets have negative graduations and fire polished tips for burr-free, even flow rates. Nonsterile, unplugged and bulk packed. Reference: ASTM E-714.

These disposable 2 mL PYREX® glass pipets are calibrated (TD) with blow-out and offer long, slender, tapered tips to make pipetting go faster and easier. All pipets have negative graduations and fire polished tips for burr-free, even flow rates. Nonsterile, unplugged and bulk packed. Reference: ASTM E-714.

These disposable 5 mL PYREX® glass pipets are calibrated (TD) with blow-out and offer long, slender, tapered tips to make pipetting go faster and easier. All pipets have negative graduations and fire polished tips for burr-free, even flow rates. Nonsterile, unplugged and bulk packed. Reference: ASTM E-714.

The Gator ® AAV9 Probes are high specificity nanobody-based biosensors that enable direct capture and quantitation of AAV9 in crude lysates, column eluates, cell lysates and cell culture supernatants. The Gator ® AAV9 probe uses proven CaptureSelect™ (Thermo Fisher Scientific) high affinity and high specificity anti-AAV9 nanobody.

Aura® PTx gets you to your best formulation faster! Backgrounded Imaging (BMI) technology to give you accurate count, size, and morphology information about particles in your sample. Couple that with Fluorescence Membrane Microscopy (FMM), which gives you definitive ID of protein aggregates and an easy way to monitor polysorbate degradation.

Experience outstanding reliability and performance in your gas chromatography analyses with Thermo Scientific™ TRACE™ 1310 Refinery Gas Analyzers. We offer a wide selection of configurations for ASTM D1945, ASTM D7833, UOP 539, ASTM 2163, GPA 2166/2286, and ISO 6974. Pre-configured and factory tested, all configurations of TRACE 1310 Refinery Gas Analyzers are ready to analyze your samples right out of the box. Experience easi…

The Mouse Regulatory T cell Staining Kit #1 contains buffers and monoclonal antibodies for CD4, CD25, and Foxp3 necessary to successfully stain and identify mouse regulatory T cells from human peripheral blood cells. The kit contains the following labeled monoclonal antibodies: Anti-Mouse CD4 FITC (RM4-5), Anti-Mouse CD25 APC (PC61.5), Anti-Mouse/Rat Foxp3 PE (FJK-16s), Rat IgG2a K Isotype Control PE, Anti-Mouse CD16/32 Purifi…

The Mouse Regulatory T cell Staining Kit #1 contains buffers and monoclonal antibodies for CD4, CD25, and Foxp3 necessary to successfully stain and identify mouse regulatory T cells from human peripheral blood cells. The kit contains the following labeled monoclonal antibodies: Anti-Mouse CD4 FITC (RM4-5), Anti-Mouse CD25 PE (PC61.5), Anti-Mouse/Rat Foxp3 APC (FJK-16s), Rat IgG2a K Isotype Control APC, Anti-Mouse CD16/32 Purif…

The Mouse Regulatory T cell Staining Kit #1 contains buffers and monoclonal antibodies for CD4, CD25, and Foxp3 necessary to successfully stain and identify mouse regulatory T cells from human peripheral blood cells. The kit contains the following labeled monoclonal antibodies: Anti-Mouse CD4 FITC (RM4-5), Anti-Mouse CD25 PE (PC61.5), Anti-Mouse/Rat Foxp3 PE-Cy5 (FJK-16s), Rat IgG2a K Isotype Control PE-Cy5, Anti-Mouse CD16/32…

Model ACL-2 was designed for automatic measurement of Saybolt/ASTM color of petroleum products utilizing the Tri-Stimulus method as prescribed in ASTM D6045, which correlates with the conventional D156 and D1500 respectively. Just set up a sample and press the START key; the test result will be displayed on the fluorescent display module in just a few seconds, and since all the subjective judgment is eliminated, a perfect trac…

CP-Wax 52 CB GC columns have lower minimum temperature and a higher maximum temperature than non-bonded polyethylene glycol (PEG) columns due to extensive cross linking, delivering higher resolution of low-boiling-point analytes. With guaranteed reproducibility and excellent temperature stability, CP-Wax 52 CB is ideal for EPA and ASTM methods.

Approximate growth surface area is 21cm² Actual inside growth surface diameter is 51.4mm Height is 15mm Manufactured from optically-clear virgin polystyrene Not treated for cell attachment, for applications where cell attachment is not desired Sterile and nonpyrogenic Have stacking beads to aid in handling Supplied with vents to provide consistent gas exchange

Approximate growth surface area is 21cm2 Actual inside growth surface diameter is 52.1mm Height is 15mm Manufactured from optically-clear virgin polystyrene Corning® CellBIND® surface treated for optimal cell attachment Sterilized by gamma radiation and nonpyrogenic Have stacking beads to aid in handling Supplied with vents to provide consistent gas exchange

400 mL beaker, with spout, manufactured with uniform wall thickness, offers optimum balance between thermal shock resistance and mechanical strength. For convenience, these beakers have a double graduated metric scale to indicate approximate content and an extra large marking spot. For PYREX® beaker covers, see Catalog No. 9985. Reference: ASTM E-960.

These narrow mouth 500 mL PYREX® Erlenmeyer flasks have 24/40 Standard Taper joints. Their uniform wall thickness provides the proper balance between mechanical strength and thermal shock resistance. For convenience, these flasks are graduated to show approximate capacity. An extra large marking space is also provided. Reference: ASTM E-123.

10 mL beaker, with spout, manufactured to provide balance between thermal shock resistance and mechanical strength. All sizes have an extra large marking spot. The 10 mL size is not graduated. For PYREX® beaker covers, see Catalog No. 9985 or No. 9990. The 10 mL beaker is designed to ASTM E-960.

These reusable 1 mL PYREX® serological pipets have smaller 0.01 mL graduation intervals than standard 1 mL pipets. They are color coded by size for easy identification and sorting. Colored graduations are enameled onto the glass. These (TD) pipets must be blown out to obtain total rated capacity. Reference: ASTM E-1044.

These reusable 2 mL PYREX® serological pipets have smaller 0.01 mL graduation intervals than standard 2 mL pipets. They are color coded by size for easy identification and sorting. Colored graduations are enameled onto the glass. These (TD) pipets must be blown out to obtain total rated capacity. Reference: ASTM E-1044.

The CN 802 combustion elemental analyzer is a versatile, cloud-enabled and fully automatic solution for carbon and nitrogen determination for a wide range of applications. The CN 802 offers high performance on both solid and liquid samples, working following international standards such as AOAC, AACC, ASBC, ISO, DIN, IFFO, OIV, ASTM, EPA.

Maximize your productivity with the Thermo Scientific™ Gallery™ Plus Aqua Master discrete analyzer, a high-throughput, fully automated, discrete photometric analyzer for water, nutrient and agricultural testing. Combining rugged hardware and custom-designed software, this system helps you meet regulatory requirements while automating complicated calibration sequences, quality control, and spiking procedures.

Approximate growth surface area is 151cm² Actual inside growth surface diameter is 138.7mm Height is 25mm Manufactured from optically-clear virgin polystyrene Not treated for cell attachment, for applications where cell attachment is not desired Sterile and nonpyrogenic Have stacking beads to aid in handling Supplied with vents to provide consistent gas exchange

An acetyl-biotinylated substrate recognized by a Eu3+ anti-acetyl MAb and SA-XL665, which is used in activator screening or to test an High Throughput SIRT1 inhibitor.  The level of enzymatic activity is inversely proportional to the amount of signal produced in the system. For more information please visit Cisbio Bioassays website.