Automation Supplies / Accessories Products & Reviews

Pkg of 100, foil seals for PCR and QX200/QX100 Droplet Digital PCR System applications, for use with PX1 PCR Plate Sealer

Pkg of 25, clear PCR plate, one-component polypropylene, can be cut for fewer samples

Pkg of 25, white PCR plate, one-component polypropylene, can be cut for fewer samples

Pkg of 1, pad for improved film sealing of 96-well plates during real-time PCR, for use in DNA Engine Opticon 2 and Chromo4 systems

New Small-Footprint, High-Flow Liquid Isolation Valve

Our HybridSPE ® -PLus plates effectively remove phospholipids and proteins from biological matrices in a simple pass-through method for accurate and reproducible LC-MS analysis. Unlike other phospholipid removal SPE products on the market, the unique retention mechanism of HybridSPE ® allows for separation of even very hydrophobic analytes from phospholipid contaminants.     

Axygen® AxyMats™ sealing mats minimize evaporation in a wide range of temperatures in PCR and storage applications. Made of research-grade silicone, they can be autoclaved, and following a bleach wash and ethanol rinse protocol, they can also be reused.Compatibility: P-DW-500-CSealing Mat for 96-well Deep Well Plates

Axygen AxyMat sealing mats can be used in a wide range of temperatures for PCR and storage applications. AxyMats minimize evaporation and are made of research-grade silicone which can be autoclaved. They can be reused following a bleach wash and ethanol rinse protocol.

The ASCO Series 090 is a line of miniature solenoid valves designed for use with air and inert gases.

The ASCO Series 384 is an aluminum body, solenoid-operated pinch valve designed for use with highly aggressive or high-purity liquids.

The ASCO Series 284 of solenoid pinch valves are designed for use with highly aggressive or high-purity liquids in analytical and medical instrumentation, sterile and aseptic systems, and food applications. 

ASCO series 273 are 2-Way normally closed and normally open pressure-operated pinch valves designed for use with high-purity liquids in biotech applications. Hermetic separation of control mechanism and the fluid within the tubing prevents contamination, assuring maximum purity of liquids.  Available in a large range of body sizes to accommodate a wide variety of tubing sizes. Typical applications include single-use bioreac…

Obtain kinetics information with qSPR or P4SPR by using this single or dual-channel injection loop module pump for simple kinetics measurement setup and operation.  

Irish Life Sciences 2mL round well 'U' bottom storage plate is manufactured in a class 8 cleanroom using a medical-grade polypropylene. The plate conforms to the footprint dimensions defined by SLAS/ANSI standards, this guarantees its compatibility with both manual and automated sample handling systems, readers, and microplate washers. The storage plate has stacking features for ease of use in plate and automation hotels.

Irish Life Sciences 1ml round well 'U' bottom low-profile plate is manufactured in a class 8 cleanroom using a medical-grade polypropylene. The low-profile plate has a height of 27mm which maximizes laboratory and automation plate hotel storage space. The plate has been designed with sealing rims to provide excellent heat and adhesive sealing and can also be sealed with the ILS reusable Silicone seal, SM423 and SM426. This pl…

Irish Life Sciences 2.2ml square well 'V' bottom plate is manufactured in a class 8 cleanroom using a medical-grade polypropylene. The plate has been developed to enable the base of the well to be in contact with heater-shaker blocks which improves the performance of the process. The plate also conforms to the footprint dimensions defined by SLAS/ANSI standards. This guarantees its compatibility with both manual and automated…

Irish Life Sciences 2.2ml square well 'U' bottom plate is manufactured in a class 8 cleanroom using a medical-grade polypropylene. The plate has been developed to enable the base of the well to be in contact with heater-shaker blocks which improves the performance of the process. The plate also conforms to the footprint dimensions defined by SLAS/ANSI standards. This guarantees its compatibility with both manual and automated…

Irish Life Sciences 1.0 ml square well 'U' bottom low-profile plate is manufactured in a class 8 cleanroom using a medical-grade polypropylene. The low-profile plate has a height of 24.4mm with a two-plate stack height of only 46.32mm which maximizes laboratory and automation plate hotel storage space. The plate has been developed precisely to conform to the footprint dimensions defined by SLAS/ANSI standards. This guarantees…

Irish Life Sciences 1.6mL square well 'U' bottom low profile storage plate is manufactured in a  cleanroom environment. The plate conforms to the footprint dimensions defined by SLAS/ANSI standards. The low-profile plate has a height of 31.6mm which maximises laboratory and automation plate hotel storage space.

Irish Life Sciences 2.2mL square well 'V' bottom plate has a total volume of 2.27mL. The top surface is particularly flat providing good heat and adhesive seal closure for long term storage. The plate is manufactured in Irish Life Sciences’ class 8 cleanrooms using a medical-grade polypropylene and conforms to the footprint dimensions defined by SLAS/ANSI standards.

Irish Life Sciences 4.6mL square well 'U' bottom storage plate is manufactured in a  cleanroom environment. The plate conforms to the footprint dimensions defined by SLAS/ANSI standards.

Irish Life Sciences 10.0mL square well 'V' bottom plate is manufactured in a  cleanroom environment. The plate conforms to the footprint dimensions defined by SLAS/ANSI standards.

Irish Life Sciences 0.36mL round well 'V' bottom plate is manufactured in a  cleanroom environment. The plate conforms to the footprint dimensions defined by SLAS/ANSI standards.

Irish Life Sciences 0.40mL round well 'U' bottom plate is manufactured in a  cleanroom environment. The plate conforms to the footprint dimensions defined by SLAS/ANSI standards.

Irish Life Sciences 1.0mL round well 'U' bottom low profile storage plate is manufactured in a  cleanroom environment. The plate conforms to the footprint dimensions defined by SLAS/ANSI standards. The low-profile plate has a height of 33mm which maximises laboratory and automation plate hotel storage space.