Identification and optimization of the chemical, series of chemicals or bio-molecule that will interact with the target using impartial, expert opinion about the best equipment, services and the latest techniques
The Thermo Scientific™ F7 robot combines the performance of an industrial robot with the application-driven benefits of a traditional Thermo Scientific laboratory robot. It's the ultimate solution for advanced motion applications.
ACQUITY™ Arc™ MDLC Systems offer highly repeatable and accurate multi-dimensional HPLC separation performance for your complex samples.
B.I.-LISA IVDr Lipoprotein Subclass Analysis (Research use only)
B.I.QUANT-PS 2.0™ Bruker IVDr Quantification in Plasma/Serum (for research use only)
Support consistent and robust growth of 3D cell cultures with Corning Matrigel Matrix-3D Plates
BIOshell™ HPLC and UHPLC columns deliver maximum speed and efficiency for the separation of biomolecules on both HPLC and UHPLC systems. The novel, superficially porous silica particles (SPP), with pore sizes from 90 Å up to 1000 Å, allow the separation of glycans as well as of very large proteins.
Our HybridSPE ® -PLus plates effectively remove phospholipids and proteins from biological matrices in a simple pass-through method for accurate and reproducible LC-MS analysis. Unlike other phospholipid removal SPE products on the market, the unique retention mechanism of HybridSPE ® allows for separation of even very hydrophobic analytes from phospholipid contaminants.
For Customers in California only: WARNING Please refer to Safety Data Sheet (SDS) Section 15 or Letter in Lieu for more information regarding California Proposition 65.
175cm2 available growth area Manufactured from optically clear virgin polystyrene Printed with lot numbers for ease in traceability 100% integrity tested Sterilized by gamma irradiation Nonpyrogenic
(This is the suggested replacement for 359378)Corning® Cell Recovery Solution, 500 mL, enables the recovery of cells cultured on Corning® Matrigel® Basement Membrane Matrix for subsequent biochemical analyses.QualityTested for ability to depolymerize a 1mm thick layer of gelled Matrigel Matrix after one hour at 2° to 8°CFiltered (0.2 µm membrane) and tested for bacteria, fungi, and mycoplasmaPreparation and StorageStable for a…
Packaged 12 inserts in a 24 well plate, 4 plates per case 10 µm thick translucent polycarbonate membrane Treated for optimal cell attachment Membrane must be stained for cell visibility
Product is an accessory for the HTS Transwell®-96 Permeable Support system 96 individually isolated wells that are sterile For use in cell growth or assay steps of an experiment Used to minimize contamination when change of media is needed or to prevent cross contamination when media type is switched during cell growth step When used with HTS Transwell®-96 unit, the plate allows for convenient pipet access to both apical…
Product includes: Transwell® unit (1 integral tray with 96 wells), reservoir plate (for cell growth steps), receiver plate (96 wells for growth or assay steps) and 2 sterile lids; 1 set per case 0.4 µm pore size PC (polycarbonate) membrane Membrane is treated for optimal cell attachment Receiver and reservoir plates are untreated Cell growth area is 0.143 cm2 which is 20-50% greater than other brands Large apical and ba…
Product includes: Transwell® unit (1 integral tray with 96 wells), reservoir plate (for cell growth steps), receiver plate (96 wells for growth or assay steps) and 2 sterile lids; 5 sets per case 1.0 µm pore size PET (polyester) membrane Membrane is treated for optimal cell attachment Receiver and reservoir plates are untreated Cell growth area is 0.143 cm2 which is 20-50% greater than other brands Large apical and baso…
HTS Transwell®-96 permeable supports have an array of 96 wells with permeable inserts connected by a rigid robotics-friendly tray Product includes: HTS Transwell®-96 permeable support insert, receiver plate (96 wells for growth or assay steps) and 1 sterile lid; 2 sets per case 3.0 µm pores size PC (polycarbonate) membrane Membrane area for cell growth or cell migration is 0.143 cm2 which is 20-50% greater than other bran…
Product includes: Transwell® unit (1 integral tray with 96 wells), reservoir plate (for cell growth steps), receiver plate (96 wells for growth or assay steps) and 2 sterile lids; 5 sets per case 0.4 µm pore size PC (polycarbonate) membrane Membrane is treated for optimal cell attachment Receiver and reservoir plates are untreated Cell growth area is 0.143 cm2 which is 20-50% greater than other brands Large apical and b…
Product includes: Transwell® unit (1 integral tray with 96 wells), reservoir plate (for cell growth steps), receiver plate (96 wells for growth or assay steps) and 2 sterile lids; 5 sets per case0.4 µm pore size PET membraneMembrane is treated for optimal cell attachmentReceiver and reservoir plates are untreatedCell growth area is 0.143 cm2 which is 20-50% greater than other brandsLarge apical and basolateral access portsAuto…
Corning Microcarriers simplify the scale-up process. The beads arrive sterile, ready-to-use, with available closed systems packaging for use with bioreactors. In addition, the microcarriers are available with surface treatments to enhance cell attachment and maximize cell yield and viability.Features:USP Class VI polystyrene material provides a consistent platformHighest Sterility Assurance Level (SAL) of 10⁻⁶NonpyrogenicLarge…
Treated for optimal cell attachment 0.4 µm pore polyester membrane 12 HTS Transwell-24 units loaded trays Reservoirs may be purchased separately (catalog number 3395)
Treated for optimal cell attachment 3.0 µm pore polycarbonate membrane 2 HTS Transwell-24 units loaded into two open reservoir trays (catalog number 3395) and two individually wrapped 24 well plates Reservoirs may be purchased separately
Treated for optimal cell attachment 0.4 µm pore polycarbonate membrane 2 HTS Transwell-24 units loaded into two open reservoir trays (catalog number 3395) and two individually wrapped 24 well plates Reservoirs may be purchased separately
Treated for optimal cell attachment 0.4 µm pore polyester membrane 2 HTS Transwell-24 units loaded into two open reservoir trays (catalog number 3395) and two individually wrapped 24 well plates Reservoirs may be purchased separately
Product includes: Transwell® unit (1 integral tray with 96 wells), reservoir plate (for cell growth steps), receiver plate (96 wells for growth or assay steps) and 2 sterile lids; 1 set per case 1.0 µm pore size PET (polyester) membrane Membrane is treated for optimal cell attachment Receiver and reservoir plates are untreated Cell growth area is 0.143 cm2 which is 20-50% over competitive devices Large apical and basola…
This is the suggested replacement for 3419. 10 µm thick translucent polycarbonate membrane Treated for optimal cell attachment Each insert is packaged in a 100mm dish, 12 inserts per case Membrane must be stained for cell visibility
(This is the suggested replacement for 3403) Packaged 12 inserts in a 24 well plate, 4 plates per case 10 µm thick translucent polycarbonate membrane Treated for optimal cell attachment Membrane must be stained for cell visibility
