General Lab Products & Reviews

AireGard model NU-140 by NuAire Laboratory Equipment is a Vertical Laminar Airflow Workstation (LAFW) designed to provide product through HEPA filtered airflow in a laminar pattern over the work surface. Model NU-140 is available in four different widths [3, 4, 5 and 6-foot (0.9, 1.2, 1.6, and 1.8 m)] and comes standard as a bench top design with optional base stand configurations such as telescoping (pick your work surface he…

The LabGard ES (Energy Saver) LP (Low Profile) NU-640 Class II, Type A2 Animal Handling Biosafety Cabinet provides the largest work access opening with the smallest footprint while offering enough versatility to assist with all facets in the vivarium industry. Designed specifically for labs with low-hanging ceilings and fits through standard doorways. The nominal 6 foot [1.8 m] wide cabinet allows the ability to mix and match…

The LabGard CYTO NU-581 Biosafety Cabinet offers a safer environment for applications involving cytotoxic API powders through a three-tiered HEPA filtration system. Tested in extreme laboratory conditions to ensure maximum personnel, product, and environmental protection, this LabGard meets NSF/ANSI 49, EN12469, and DIN12980.

Blizzard™ HC VIP model NU-99729VFT (Variable Frequency & Touchscreen) plugs in to nearly any laboratory with its ability to operate on a spectrum of electrical currents from 100-230V/50-60Hz and connect to them through a broad choice of power cords.

Blizzard™ HC Under-Counter Ultrallow Freezer stores samples by using HC refrigerants and protects them within a structure using steel walls and composite insulation.

The In-VitroCell ES NU-5810 Direct Heat CO2 Incubator with Dual Decontamination Cycles provides lab technicians a controlled in-vitro environment to grow cell tissue cultures. 

The In-VitroCell NU-8625 is a water jacket co2 incubator featuring a humidity sensor that monitors RH levels within the growth chamber. 

The In-VitroCell NU-8645 CO2 Incubator uses a water jacket to control and maintain the temperature in the growth chamber.

The PharmaGard NR797 creates a negative pressure clean air [ISO Class 5] re-circulating controlled environment for the aseptic compounding of hazardous drugs. The HEPA filtered work area maintains a negative air pressure relative to the interchange compartment, which operates at a negative air pressure relative to the surrounding room. These levels of protection minimize the possibility of chemotherapy agents or other hazardou…

The PharmaGard NTE797 creates a negative pressure clean air [ISO Class 5] total exhaust controlled environment for the aseptic compounding of hazardous drugs. The HEPA filtered work area maintains a negative air pressure relative to the interchange compartment, which operates at a negative air pressure relative to the surrounding room. These levels of protection minimize the possibility of chemotherapy agents or other hazardou…

The LabGard NU-125 provides Class II protection for personnel, product, and the environment. The room can be used for applications involving high-throughput robotic systems, large high-speed cell sorters, ultra-centrifuges, and laboratory equipment requiring Class II protection from potentially harmful aerosols and airborne particles. Applications: A perfect match for the BD FACS Aria Flow Cytometer Laboratory equipment or pro…

Designed to boost productivity of the Fluent® Automation Workstation by Tecan. FluentControl Scheduler simplifies design of complex workflows, giving you increased efficiency and flexibility in your laboratory processes. The software increases throughput with easy process definition and dynamic scheduling updates during a run.

An extension of Fluent's intelligent Workdeck to monitor the deck set up and ensure that correct loading leads to the successful completion of a run. Cameras mounted inside the instrument watch out for problems before they occur. Plus, the technology highlights discrepancies and allows manual corrections in real time during instrument loading and worktable set-up.

Compact. Efficient. Easy To Use

Discrete Droplet Dispensing™, ONLY cooler! Unleash the power of discrete droplet dispensing to enable superior performance. Better Yield. Higher Throughput. Expanded Dynamic Range. BioDot’s platform design expertise applied to the Lyobead formation challenge in an established product.

BioDot’s AD3220 system is designed for high-speed aspirating and dispensing applications to glass slides, microtiter plates, membranes or any custom surface. This tabletop platform is ideal for R&D environments, but still provides enough dispense area for pilot scale production. Dispensing technology, number of channels and deck options enable customization to meet multiple application needs.

Features:Overhead Gantry XYZ System (600 x 300 mm motion envelope)Fixed Nest BaseEnclosure with Humidity ControlChassisPC Control Workstation with AxSys SoftwareAspirate and Dispense CapabilityChoice of 3 Nests

Oxygen unit for oxygen regulation in the ClinoStar system

Control your ClinoStar remotely with CelVivo Cloud

All-in-one bioreactor applicable with the ClinoStar system

Precision performance for clinical labs

Fast micro-centrifugation in an intuitive ultra-compact design

Easy, Adaptable, Control

The TT24-7 continuous air/gas monitoring system incorporates two electrically-cooled traps which operate in tandem to ensure 100% data capture.   The TT24-7 thermal desorption system is a robust, transportable thermal desorption unit, convenient for installation onsite or in mobile response vehicles as well as conventional laboratories. The TT24-7 interfaces to GC(MS) or process MS technology and incorporates two electri…

The compact Arium® Mini water purification systems have been designed to meet your Type 1 ultrapure water needs, handling up to 10 liters per day. Experience maximum convenience with the flexible, removable dispensing unit, keeping you ahead in your lab routines.