General Lab Products & Reviews

The Empore™ High Performance Extraction Disk Plate differs in design from plates offered by other manufacturers and requires a specific vacuum manifold.  Manifolds supplied by different plate manufacturers are specific to the design of their plates and cannot generally be used with plates from other manufacturers.  In some cases, the use of spacers to raise/lower the height of a collection device inside the manifold may overco…

Replacement gaskets are available with the vacuum manifold assembly.  The gasket can become worn over time and the seal between the plate and the manifold will be affected.  This may result in poor vacuum pressure and negatively effect flow rates.  The gasket should be checked regularly and replaced when it becomes worn.

EmporeTM Tape Pads are intended for sealing unused portions of a 96-well solid phase extraction plate during vacuum processing to enable vacuum to be uniformly applied to each well being used.  Use a clean sheet each time for maximum sealing ability.  Note: these tape sheets are not intended for sealing collection plates prior to sample injection because the adhesive may clog the injection needle.

Fits plastic or glass media bottles with 33mm neck sizes. Cellulose acetate (CA) membranes provide fast flow rates and low protein binding and are good for filtering cell culture media. Angled hose connector simplifies vacuum line attachment. Individually packaged, sterile and certified nonpyrogenic. Each system has the membrane material and pore size printed on the unit and is color-coded by membrane type for easy produ…

E-Z Ex-Traction Glass MicroTubes are precision engineered and manufactured to have tight tolerances to reduce the chance of failure in automated sample handling and storage systems in compound or biological sample applications.  The barcodes on tubes are 100% readable and never duplicated ensuring perfect data management.  The patented design allows; • each tube to be 2D bar coded; offered with or without permanent 2D barco…

Impact™ protein precipitation plates with Solvent Shielding Technology™ offer a rapid and convenient way to remove proteins from plasma and tissue homogenate samples prior to analysis.The Solvent Shielding Technology design will withhold organic solvents above the filter membranes for up to 25 minutes, allowing for direct in-well precipitation upon sample addition. The precipitate is then filtered out via vacuum, centrifuge or…

Compact and economic device for the automatic determination of dynamic (DET) and monotonic (MET) titrations with automatic equivalence point detection as well as SET endpoint titration. Compact and economic titration automat  Easy installation and controlling  Intelligent dosing unit with monitoring of the titrant as option  Highest precision thanks to high resolution measuring interface  Live curve  Compact USB printe…

The innovative Omni Prep Multi-Sample Homogenizer supports simultaneous homogenization of up to six samples in a single process in sample tubes ranging from 1.5 mL to 50 mL. The Omni Prep microprocessor control allows the user to program both time and speed for processing up to 10 minutes at variable speeds up to 30,000 rpm. The oscillating sample rack mimics manual homogenization by transitioning the generator probes through…

CyBio provide a broad range of CyBio Tips, covering different volume ranges and several tip lengths.  You may select from CyBio Tips in the following three qualities: standard, pre-sterilized or pre-sterilized, PCR certified with and without filter. All CyBio Tips have been designed, manufactured and quality inspected with respect to automation requirements, in turn permitting unattended, precise and highly reproducible s…

Fits plastic or glass media bottles with 45mm neck sizes. Cellulose acetate (CA) membranes provide fast flow rates and low protein binding and are good for filtering cell culture media. Angled hose connector simplifies vacuum line attachment. Individually packaged, sterile and certified nonpyrogenic. Each system has the membrane material and pore size printed on the unit and is color-coded by membrane type for easy produ…

KDS EZflow 2010/2011 Is a durable basic syringe pump designed to enhance quick efficient operation while maintaining simplicity.

Autoclavable caps that are designed to ensure the ultimate in product safety. The liners are made of a nontoxic white styrene-butadiene rubber and are faced with Teflon®, which offers excellent chemical resistance. Models available in range are the; • 13-425 Black Phenolic Cap with TFE Liner • 15-425 Black Phenolic Cap with TFE Liner • 22-400 Black Phenolic Cap with TFE Liner • 24-400 Black Phenolic Cap with TFE Liner For mor…

These polypropylene autoclavable open top caps have a bonded Teflon &# 174; faced silicone liner making them ideal for storage and retrieval of volatile solvents, sensitive compounds and corrosive chemicals. The liners consist of 0.055" (1.4 mm) of silicone and 0.005" (0.14 mm) of Teflon®.  Models that are available are list below. • 13-425 White PP Cap with TFE / Silicone Liner • 15-425 White PP Cap with TFE / Silicone Liner…

These polypropylene autoclavable open top caps have a bonded Teflon &# 174; faced silicone liner making them ideal for storage and retrieval of volatile solvents, sensitive compounds and corrosive chemicals. The liners consist of 0.055" (1.4 mm) of silicone and 0.005" (0.14 mm) of Teflon®.

Designed specially for cell culture applications requiring exceptionally slow speeds, gentle mixing preventing shear and low heat transfer. May be used in an environment with CO2 and non- condensing humidity, and with a temperature range to 50°C. Packaged 1 unit per case. • 5-200 RPM The models in the range are listed below.• 120 VAC Micro-Stir, 1 Position with NA Line Cord • 230 VAC Micro-Stir, 1 Position with CE Line Cord •…

Designed specifically for use with suspension culture flasks. The effortless motor provides uniform speeds for great results with cell culture or small fermentations. An easy-to-read display allows exact RPM to be set. The smooth-running motor reduces heat transfer to medium being stirred. Takes flask sizes to 3 Liters. May be used in an environment with CO2 and non-condensing humidity, and with a temperature range to 50°C. Pa…

The Wheaton Remote Control allows all stirrer functions to be controlled and monitored without opening an incubator and disturbing the incubator contents. The remote control comes with a 12 ft. (3.66 m) cord which allows the stirrer to be placed in an incubator (such as the Wheaton roll-in or CO2 Incubators) while allowing freedom of placement for the remote controller. • For BioStir® and Micro-Stir® Magnetic Stirrers

A convenient, space-saving and economical alternative to a warm room for small production runs. Designed to hold full-size units, it can be used in combination with the optional shelves to accommodate spinner flasks, rocker tables, and other types of equipment. Double-walled construction provides for temperature stability and easy cleaning. Shelves are not supplied with incubator. • Designed specifically for use with Wheaton R…

A convenient, space-saving and economical alternative to a warm room for small production runs. Designed to hold full-size units, it can be used in combination with the optional shelves to accommodate spinner flasks, rocker tables, and other types of equipment. Double-walled construction provides for temperature stability and easy cleaning. Shelves are not supplied with incubator. • Designed specifically for use with Wheaton R…

The 20 mL size Liquid Scintillation Vials are made from Wheaton 180 low potassium borosilicate glass.  The background counts are consistent and low; ultraviolet transmission is high. • Available with cap attached, caps packed separately or without cap • Dimensions (OD x H): 28 mm x 61 mm (with cap attached)

The 20 mL sized vials are made from Wheaton 180 low potassium borosilicate glass. The background counts are consistent and low; ultraviolet transmission is high. • Available with cap attached, caps packed separately or without cap • Dimensions (OD x H): 28 mm x 61 mm (with cap attached)

The 20 mL sized vials are made from Wheaton 180 low potassium borosilicate glass.  The background counts are consistent and low; ultraviolet transmission is high. • Available with cap attached, caps packed separately or without cap • Dimensions (OD x H): 28 mm x 61 mm (with cap attached)

The 20 mL sized vials are made from Wheaton 180 low potassium borosilicate glass.  The background counts are consistent and low; ultraviolet transmission is high. • Available with cap attached, caps packed separately or without cap • Dimensions (OD x H): 28 mm x 61 mm (with cap attached)