Trusted information for laboratory scientists on General Lab products and techniques on SelectScience, including incubators, autoclaves, light microscopy and pH meters.
These UV Sterilisation Cabinets provide a convenient area for setting up PCR reactions in a nucleic acid free environment thus limiting PCR reaction contamination. Acting effectively as a low cost alternative to a clean room, the powerful UV lights on the cabinets denature nucleic acids in 5 to 30 minutes making them unsuitable for amplification. The cabinet incorporates safety features to prevent user exposure to UV light. Th…
The Benchmark freeze driers are engineered to process pilot to production scale batches of pharmaceutical and biotech prodcuts. With numerous options available, the Benchmark series freeze driers allow customers to configure the freeze drier to fit their individual application. Built from pharmaceutical grade stainless steel throughout and available with Clean in Place (CiP) and/or Steam in Place (SiP) capability with 21 CFR p…
The FTS ThermoJetTM & AirJet® XE systems deliver a stream of precisely controlled hot or cold air that can can be used for testing components, hybrids, modules, PCBs, and assemblies at temperature. The AirJet can also be used to cycle temperatures and is an ideal tool for a materials R&D laboratory. Air temperatures range from -80°C to +225°C, depending upon model. A special model, the XR exists for cooling test samples for NM…
The FTS Bio-Cool is the most reliable, safe, and easy to use controlled rate freezer for cryopreservation. Typical applications include cryopreservation of human and animal embryos and biological tissue and cell lines. The Bio-Cool is the only controlled rate freezer that does not require expendable liquid nitrogen and the associated pumping, re-filling, and storing of a high-pressure liquid. The Bio-Cool, simply plugs into a…
Hotpack washers offer large washer capabilities in an affordable under counter size. Six (6) standard wash programs include settings for temperature and load size. Multiple rinse cycles and a neutralizer dosing system are designed to eliminate detergent residue. Multiple final rinse cycles utilizing deionized water result in sparkling clean glassware every time. When activated, glassware is dried using electric heat and mechan…
The Stepper 416 is a highly comfortable pipette intended for reliable repeat dispensing within 10 to 5000 µL.
Compact dispensers for safe reagent handling, adapted to refrigerator storage as well as water bath heating.Dosing mechanism entirely protected inside reservoir. Manufactured and tested to fully comply with the latest regulations on instrument safety and precision. Acurex™ Compact 501 Models ranging from 0.2 to 30 mL.Low Profile Dispensers, Acurex™ Compact 501 Features: Integrated dosing mechanism Simple, robust construc…
Twister universal 336 pipette stands accommodate Socorex and other brands of micropipettes. The best storage solution to remove all micropipettes scattered over the bench.
BIGNEAT Laminar flow cabinets are designed to protect product or operating staff by maintaining a particle-free ultra clean zone. They can be used whenever a Class II cabinet is deemed unnecessary. Laminar Flow Cabinets are available in two versions, providing horizontal air for operator or product protection. All BIGNEAT Laminar Flow Cabinets are provided with a well lit diffused hidden lighting as standard and efficient soun…
The Thermo Scientific™ Cytomat™ 24 C Automated Incubator Series is the ideal solution for fast high capacity storage and incubation with dependable sample protection for cell-based workflows. The Cytomat 24 series is a floor-standing unit with a capacity for 504 standard microplates in a small footprint.
The iEMS Incubator/Shaker is a high performance 96-well plate incubator and orbital shaker being optimal in the most demanding microplate EIA assays requiring temperatures of up to 40°C. It has been designed to handle up to nine 96-well plates and to fit into a small bench space, making it perfect for medium-sized laboratories.
The iEMS Incubator/Shaker HT is a high-performance 96-well plate incubator and orbital shaker, ideal for assays requiring temperatures up to 70°C, such as DNA hybridization and primer extension assays. It has been designed to handle up to three microplates and to occupy a small bench space, making it perfect for medium-sized laboratories.
Simple, reliable concentrating and desalting of 50 to 500 µL samples. Ensures rapid processing of samples. Typical recoveries are greater than 90%. Available with low protein binding Omega™, Bio-Inert®, and GHP membranes. A wide range of MWCOs, color-coded for easy identification. Constructed of low-binding polypropylene. Ultrasonically welded seals prevent bypass or seal failure. Fits standard centrifuge rotors…
The Empore™ High Performance Extraction Disk Plate differs in design from plates offered by other manufacturers and requires a specific vacuum manifold. Manifolds supplied by different plate manufacturers are specific to the design of their plates and cannot generally be used with plates from other manufacturers. In some cases, the use of spacers to raise/lower the height of a collection device inside the manifold may overco…
Replacement gaskets are available with the vacuum manifold assembly. The gasket can become worn over time and the seal between the plate and the manifold will be affected. This may result in poor vacuum pressure and negatively effect flow rates. The gasket should be checked regularly and replaced when it becomes worn.
EmporeTM Tape Pads are intended for sealing unused portions of a 96-well solid phase extraction plate during vacuum processing to enable vacuum to be uniformly applied to each well being used. Use a clean sheet each time for maximum sealing ability. Note: these tape sheets are not intended for sealing collection plates prior to sample injection because the adhesive may clog the injection needle.
Fits plastic or glass media bottles with 33mm neck sizes. Cellulose acetate (CA) membranes provide fast flow rates and low protein binding and are good for filtering cell culture media. Angled hose connector simplifies vacuum line attachment. Individually packaged, sterile and certified nonpyrogenic. Each system has the membrane material and pore size printed on the unit and is color-coded by membrane type for easy produ…
E-Z Ex-Traction Glass MicroTubes are precision engineered and manufactured to have tight tolerances to reduce the chance of failure in automated sample handling and storage systems in compound or biological sample applications. The barcodes on tubes are 100% readable and never duplicated ensuring perfect data management. The patented design allows; • each tube to be 2D bar coded; offered with or without permanent 2D barco…
Impact™ protein precipitation plates with Solvent Shielding Technology™ offer a rapid and convenient way to remove proteins from plasma and tissue homogenate samples prior to analysis.The Solvent Shielding Technology design will withhold organic solvents above the filter membranes for up to 25 minutes, allowing for direct in-well precipitation upon sample addition. The precipitate is then filtered out via vacuum, centrifuge or…
The innovative Omni Prep Multi-Sample Homogenizer supports simultaneous homogenization of up to six samples in a single process in sample tubes ranging from 1.5 mL to 50 mL. The Omni Prep microprocessor control allows the user to program both time and speed for processing up to 10 minutes at variable speeds up to 30,000 rpm. The oscillating sample rack mimics manual homogenization by transitioning the generator probes through…
Fits plastic or glass media bottles with 45mm neck sizes. Cellulose acetate (CA) membranes provide fast flow rates and low protein binding and are good for filtering cell culture media. Angled hose connector simplifies vacuum line attachment. Individually packaged, sterile and certified nonpyrogenic. Each system has the membrane material and pore size printed on the unit and is color-coded by membrane type for easy produ…
