These 4.7L PYREX® jars are recommended for use as animal jars or for other purposes where resistance to hot air and steam sterilization is of importance. These jars are blown with walls approximately 4.5mm (3/16
These 17L PYREX® jars are mold-blown with substantial walls for mechanical strength. The open end of these jars is ground flat. These jars can also be used as animal jars. Do not use with heat, pressure or vacuum applications
These 26.5L PYREX® jars are mold-blown with substantial walls for mechanical strength. The open end of these jars is ground flat. These jars can also be used as animal jars. Do not use with heat, pressure or vacuum applications.
These 32L PYREX® jars are mold-blown with substantial walls for mechanical strength. The open end of these jars is ground flat. These jars can also be used as animal jars. Do not use with heat, pressure or vacuum applications.labware
These 7.5L PYREX® jars are mold-blown with substantial walls for mechanical strength. The open end of these jars is ground flat. These jars can also be used as animal jars. Do not use with heat, pressure or vacuum applications.
These 9.5L PYREX® jars are mold-blown with substantial walls for mechanical strength. The open end of these jars is ground flat. These jars can also be used as animal jars. Do not use with heat, pressure or vacuum applications.
These 17L PYREX® jars are mold-blown with substantial walls for mechanical strength and have recessed finger grips for convenience in handling. The open end of these jars is ground flat. These jars can also be used as animal jars. Do not use with heat, pressure or vacuum applications.
These 26.5L PYREX® jars are mold-blown with substantial walls for mechanical strength and have recessed finger grips for convenience in handling. The open end of these jars is ground flat. These jars can also be used as animal jars. Do not use with heat, pressure or vacuum applications.
These 36L PYREX® jars are mold-blown with substantial walls for mechanical strength and have recessed finger grips for convenience in handling. The open end of these jars is ground flat. These jars can also be used as animal jars. Do not use with heat, pressure or vacuum applications.
These 11.4L PYREX® rectangular chromatography tanks are ground to the close tolerances needed for tight cover fit. Jar edges are ground flat within 0.25mm. Covers are not supplied.Warning: Do not use with heat, pressure or vacuum applications.
These 3.8L PYREX® rectangular chromatography tanks are ground to the close tolerances needed for tight cover fit. Jar edges are ground flat within 0.25mm. Covers are not supplied.Warning: Do not use with heat, pressure or vacuum applications.
These 13.2L PYREX® general-purpose cylindrical chromatography tanks have tops ground to within 0.25mm tolerances to insure a tight cover fit. Covers are not supplied.Warning: Do not use with heat, pressure or vacuum applications.
These 36L PYREX® general-purpose cylindrical chromatography tanks have tops ground to within 0.25mm tolerances to insure a tight cover fit. Covers are not supplied.Warning: Do not use with heat, pressure or vacuum applications.
These 6.6L PYREX® general-purpose cylindrical chromatography tanks have tops ground to within 0.1mm tolerances to insure a tight cover fit. Covers are not supplied.Warning: Do not use with heat, pressure or vacuum applications.
(This is the suggested replacement for 6946-1L)These 1L PYREX® kettles have covers with openings to accommodate three 24/40 Standard Taper joints and one 34/45 Standard Taper joint. Interchangeable Standard Taper joints allow quick assembly with condensers, stirrers and funnels. Flanges of covers and bottoms are finely ground for a tight seal. For use with heating mantle only. For replacement covers, see No. 6947-500CO: for re…
This is a 1L PYREX® replacement kettle bottom for No. 6947 resin reaction kettles. For replacement covers, see No. 6947-500CO
(This is the suggested replacement for 6946-2L)These 2L PYREX® kettles have covers with openings to accommodate three 24/40 Standard Taper joints and one 34/45 Standard Taper joint. Interchangeable Standard Taper joints allow quick assembly with condensers, stirrers and funnels. Flanges of covers and bottoms are finely ground for a tight seal. For use with heating mantle only. For replacement covers, see No. 6947-2LCO: for rep…
This is a 2L PYREX® replacement kettle bottom for No. 6947 resin reaction kettles. For replacement covers, see No. 6947-2LCO.
These replacement PYREX® kettle covers fit 2 to 4L 6947 resin reaction kettles. They have covers with openings to accommodate three 24/40 Standard Taper joints and one 34/45 Standard Taper joints. Interchangeable Standard Taper joints allow quick assembly with condensers, stirrers and funnels. Cover flanges are finely ground for a tight seal.
(This is the suggested replacement for 6946-3L)These 3L PYREX® kettles have covers with openings to accommodate three 24/40 Standard Taper joints and one 34/45 Standard Taper joint. Interchangeable Standard Taper joints allow quick assembly with condensers, stirrers and funnels. Flanges of covers and bottoms are finely ground for a tight seal. For use with heating mantle only. For replacement covers, see No. 6947-2LCO: for rep…
This is a 3L PYREX® replacement kettle bottom for No. 6947 resin reaction kettles. For replacement covers, see No. 6947-2LCO.
(This is the suggested replacement for 6946-4L)These 4L PYREX® kettles have covers with openings to accommodate three 24/40 Standard Taper joints and one 34/45 Standard Taper joint. Interchangeable Standard Taper joints allow quick assembly with condensers, stirrers and funnels. Flanges of covers and bottoms are finely ground for a tight seal. For use with heating mantle only. For replacement covers, see No. 6947-2LCO: for rep…
This is a 4L PYREX® replacement kettle bottom for No. 6947 resin reaction kettles. For replacement covers, see No. 6947-2LCO.
(This is the suggested replacement for 6946-500)These 500 mL PYREX® kettles have covers with four openings to accommodate 24/40 Standard Taper joints. Interchangeable Standard Taper joints allow quick assembly with condensers, stirrers and funnels. Flanges of covers and bottoms are finely ground for a tight seal. For use with heating mantle only. For replacement covers, see No. 6947-500CO: for replacement bottoms, see No. 6947…
This is a 500 mL PYREX® replacement kettle bottom for No. 6947 resin reaction kettles. For replacement covers, see No. 6947-500CO.
