Trusted information for laboratory scientists on General Lab products and techniques on SelectScience, including incubators, autoclaves, light microscopy and pH meters.
(This is the suggested replacement for 5342-500)These 500 mL PYREX® heavy wall flasks have seated a bent, removable plastic tubulation in a grommet. Should the flask be upset, the grommet acts as a shock absorber. For convenience, the flasks are graduated to show approximate capacity. The neck finish affords an excellent fit for rubber stoppers and uses a No. 7 rubber stopper. Tubulation O.D. is 12.5mm."
These PYREX® 125 mL micro filtering flasks are recommended for microchemical use. The vacuum hose is attached to the flask's sidearm. A funnel is inserted into the neck of the flask through a ground joint or rubber stopper. The applied vacuum facilitates the filtration process. These flasks have permanent white enamel marking spots.
These PYREX® 50 mL micro filtering flasks are recommended for microchemical use. The vacuum hose is attached to the flask's sidearm. A funnel is inserted into the neck of the flask through a ground joint or rubber stopper. The applied vacuum facilitates the filtration process. These flasks have permanent white enamel marking spots.
These 125 mL PYREX® iodine determination flasks are blown in specially designed molds, thereby insuring uniformity and proper contour. The No. 22 Standard Taper stopper projects above the liquid seal trough to facilitate removal. For replacement stoppers, see No. 7640N. Reference: ASTM D-29 and D-555.
These 250 mL PYREX® iodine determination flasks are blown in specially designed molds, thereby insuring uniformity and proper contour. The No. 22 Standard Taper stopper projects above the liquid seal trough to facilitate removal. For replacement stoppers, see No.7650-22. Reference: ASTM D-29 and D-555.
These 500 mL PYREX® iodine determination flasks are blown in specially designed molds, thereby insuring uniformity and proper contour. The No. 22 Standard Taper stopper projects above the liquid seal trough to facilitate removal. For replacement stoppers, see No. 7640N. Reference: ASTM D-29 and D-555.
These 100 mL PYREX® Kjeldahl flasks have tooled finished necks for extra strength and uniform rubber stopper (No. 2) fit. Wall thickness is controlled to offer the optimum balance between thermal shock and chemical resistance. They can be used in ASTM E-258 procedures. Care must be taken to ensure the bottoms of the flasks do not come in contact with the heating elements. Most Kjeldahl equipment manufacturers have ring support…
These 300 mL PYREX® Kjeldahl flasks have tooled finished necks for extra strength and uniform rubber stopper (No. 5) fit. Wall thickness is controlled to offer the optimum balance between thermal shock and chemical resistance. They can be used in ASTM E-258 procedures. Care must be taken to ensure the bottoms of the flasks do not come in contact with the heating elements. Most Kjeldahl equipment manufacturers have ring support…
These 800 mL PYREX® Kjeldahl flasks have tooled finished necks for extra strength and uniform rubber stopper (No. 7) fit. Wall thickness is controlled to offer the optimum balance between thermal shock and chemical resistance. They can be used in ASTM E-258 procedures. Care must be taken to ensure the bottoms of the flasks do not come in contact with the heating elements. Most Kjeldahl equipment manufacturers have ring support…
These small 30 mL PYREX(r) Kjeldahl flasks, without tooled neck, is suitable for multiple microdigestions. They take a No. 0 rubber stopper. Care must be taken to ensure the bottoms of the flasks do not come in contact with the heating elements. Most Kjeldahl equipment manufacturers have ring supports for this purpose. -Reference: ASTM E-147.
Brand: PYREX® Flask Style: Erlenmeyer Capacity: 250 mL Neck Style: Narrow mouth
These 100 mL PYREX® EZ Access™ wide mouth volumetric flasks are calibrated to Class A tolerances and are designed for microchemical work. Low actinic stained glass provides protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The heavy duty, wide mouth facilitates filling and mixing. Supplied with an…
(This is the suggested replacement for 55635-25FO)These 25 mL PYREX® EZ Access™ wide mouth volumetric flasks are calibrated to Class A tolerances and are designed for microchemical work. Low actinic stained glass provides protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The heavy duty, wide mouth…
These 250 mL PYREX® EZ Access™ wide mouth volumetric flasks are calibrated to Class A tolerances and are designed for microchemical work. Low actinic stained glass provides protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The heavy duty, wide mouth facilitates filling and mixing. Supplied with an…
(This is the suggested replacement for 55635-50FO)These 50 mL PYREX® EZ Access™ wide mouth volumetric flasks are calibrated to Class A tolerances and are designed for microchemical work. Low actinic stained glass provides protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The heavy duty, wide mouth…
These 10 mL Class A PYREX® volumetric flasks are made from low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 9 Standar…
These 100 mL Class A PYREX® volumetric flasks are made from low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 13 Stand…
These 1L Class A PYREX® volumetric flasks are made from low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 22 Standard…
These 200 mL Class A PYREX® volumetric flasks are made from low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 13 Stand…
These 200 mL Class A PYREX® volumetric flasks are made from low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 13 Stand…
These 25 mL Class A PYREX® volumetric flasks are made from low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 9 Standar…
These 250 mL Class A PYREX® volumetric flasks are made from low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 16 Stand…
These 250 mL Class A PYREX® volumetric flasks are made from low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 16 Stand…
