Trusted information for laboratory scientists on General Lab products and techniques on SelectScience, including incubators, autoclaves, light microscopy and pH meters.
These 160 mL PYREX® wide mouth bottles are for general storage of solutions and tissue culture work. Wide mouth bottle for easy measuring or filling Uses a GPI 40-400 threaded phenolic screw cap (No. 9999-40) with rubber liner. Will withstand autoclaving at 121°C. Meets the requirements for milk dilution bottles published by the American Public Health Association.
These 160 mL PYREX® narrow mouth bottles have a cut-line graduation mark at 99 ± 1 mL. Used for general storage of solutions and tissue culture work. Uses a GPI 28-400 threaded phenolic screw cap (No. 9999-28) with rubber liner. Will withstand autoclaving at 121°C. Meets the requirements for milk dilution bottles published by the American Public Health Association.
These 160 mL PYREX® wide mouth bottles have a cut-line graduation mark at 99 ± 1 mL. Wide mouth bottle for easy measuring or filling Used for general storage of solutions and tissue culture work. Uses a GPI 40-400 threaded phenolic screw cap (No. 9999-40) with rubber liner Will withstand autoclaving at 121°C. Meets the requirements for milk dilution bottles published by the American Public Health Association.
These heavy duty 100 mL PYREX® round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring. New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.Caution: DO NOT tighten caps immediately after autoclaving as the vacuum resulting from c…
These heavy duty 10L PYREX® round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring. Bottles have permanent white enamel graduations and marking spots.Caution: Bottles larger than 2L should NOT be used with bottle top filter units, or in other applications involving vacuum pressure, as b…
These heavy duty 25mL PYREX® round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL25 threaded cap. A pouring ring is not included on the 25mL size. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). Bottles have permanent white enamel graduations and marking spots.Caution: DO NOT ti…
These heavy duty 250 mL PYREX® round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring. New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.Caution: DO NOT tighten caps immediately after autoclaving as the vacuum resulting from c…
The Corning® polytetrafluoroethylene faced silicone septa fit into open top PBT caps (No. 1395-25HTSC) with GL25 threads to allow for aseptic reagent delivery or culture sampling using a syringe and needle. They can be autoclaved at 121°C or dry heat sterilized at up to 180°C.
These heavy duty 2L PYREX® round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring.. New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.Caution: DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cool…
The Corning® orange polypropylene caps are autoclavable at 121°C, have a GL32 thread and use a linerless plug seal design for efficient sealing.
The Corning® polytetrafluoroethylene faced silicone septa fit into open top PBT caps (No. 1395-32HTSC) with GL32 threads to allow for aseptic reagent delivery or culture sampling using a syringe and needle. They can be autoclaved at 121°C or dry heat sterilized at up to 180°C.
These heavy duty 3.5L PYREX® round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring.. New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.Caution: DO NOT tighten caps immediately after autoclaving as the vacuum resulting from co…
The red Corning® polybutylene terephthalate (PBT) high temperature caps have a GL45 thread, can be dry heat sterilized at up to 180°C and have a Polytetrafluorethylene (PTFE) liner for efficient sealing.
The red Corning® open top polybutylene terephthalate (PBT) high temperature caps have a GL45 thread and are designed to be used with piercible silicone septa (sold separately, see No. 1395-45SS or 1395-45TS). They can be dry heat sterilized at up to 180°C.
The Corning® orange polypropylene caps are autoclavable at 121°C, have a GL45 thread and use a linerless plug seal design for efficient sealing.
These Corning® gray polypropylene vented caps have a 0.22 µm polytetrafluoroethylene (PTFE) hydrophobic membrane to allow sterile gas exchange while preventing contamination. They are autoclavable at 121°C, have a GL45 thread and use a linerless plug seal design for efficient sealing.
The Corning® polypropylene pouring rings fit on the lips of PYREX® media bottles with GL45 threads for drip-free pouring and are autoclavable at 121°C.
The Corning® silicone septa fit into open top PBT caps (No. 1395-45HTSC) with GL45 threads to allow for aseptic reagent delivery or culture sampling using a syringe and needle. They can be autoclaved at 121°C or dry heat sterilized at up to 180°C.
The Corning® polytetrafluoroethylene faced silicone septa fit into open top PBT caps (No. 1395-45HTSC) with GL45 threads to allow for aseptic reagent delivery or culture sampling using a syringe and needle. They can be autoclaved at 121°C or dry heat sterilized at up to 180°C.
These heavy duty 50 mL PYREX® round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL32 threaded cap and a drip-free pouring ring. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). Bottles have permanent white enamel graduations and marking spots.Caution:DO NOT tighten caps immediate…
These 500 mL round bottles can be used for storage as well as mixing and storage. The indented side grips ensure easy handling. The bottles are graduated to their full working volume. The narrow profile uses less space on shelves, refrigerators and autoclaves. The new style cap has wider knurls for a more comfortable grip. It also requires 1/3 less turns to secure a closure.Indented gripping zones along the sides of bottle all…
These heavy duty 5L PYREX® round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring. Bottles have permanent white enamel graduations and marking spots.Caution: Bottles larger than 2L should NOT be used with bottle top filter units, or in other applications involving vacuum pressure, as br…
These heavy duty 100 mL square bottles are manufactured from PYREX® borosilicate glass for chemical and thermal resistance. Square bottles are easier to handle, require less space (13-20%) on the shelf or in the autoclave and are ideal for mixing, sampling and storage. Features include white enamel graduations, large marking spot and a glass ridge molded into the bottle to indicate full capacity. Bottles include a linerless, o…
