General Lab Products & Reviews

Ideal for tissue culture usage or any non-toxic solution that requires aliquoted or aspirating/dispensing in a sterile environment. This nonpyrogenic pipet has a 3 mL overfill capacity.

For tissue culture usage or any non-toxic solution that requires aliquoted or aspirating/dispensing in a sterile environment. Nonpyrogenic pipet with 10 mL overfill capacity. Individually packed in a paper/plastic thermoformed package.

Ideal for tissue culture usage or any non-toxic solution that requires aliquoted or aspirating/dispensing in a sterile environment. Nonpyrogenic, nonplugged pipet, individually wrapped in thermoformed paper/plastic wrap.

Ideal for tissue culture usage or any non-toxic solution that requires aliquoted or aspirating/dispensing in a sterile environment. This nonpyrogenic pipet has a 15 mL overfill capacity and is individually packed in an all-plastic wrapper.

High torque, low rpm stirrer motor specifically designed to maintain constant low speed for use on top of Corning® Reusable Spinner Flasks. The gearhead stirrer motor delivers 14.5 in-lbs of torque and has a maximum speed of 350 rpm. The weight of the motor is 9 lbs (4.1kg) and operates on 120VAC 60Hz.

120mm Center Cap Assembly for Corning® Reusable Spinner Flasks is designed for use with direct overhead drive motor. These cap assemblies required optional 8L, 15L or 36L paddle assemblies and can be used on all 4512 series vertical sidearm flasks.

This is a replacement power pack for Corning® Slow-Speed Stirrers (SS2L, SS10L, SS4R, SS4L and SS10R), Submersible Stirrers (IM75 and IM150) and Multiple Position Stirrers (MP4L, MP5L, MP9L and MP4R). It operates on 120V/60Hz and is UL approved to meet needs in North America and other locations with similar requirements.

Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 8L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.

Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 6L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.

Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 15L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.

Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 36L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.

100mm Center Cap Assembly for Corning® Reusable Spinner Flasks is designed for use with direct overhead drive motor. These cap assemblies required optional 8L, 15L or 36L paddle assemblies and can be used on all 4500 and 4510 series vertical sidearm flasks.

High torque, low rpm stirrer motor specifically designed to maintain constant low speed for use on top of Corning® Reusable Spinner Flasks. The gearhead stirrer motor delivers 14.5 in-lbs of torque and has a maximum speed of 350 rpm. The weight of the motor is 9 lbs (4.1kg) and operates on 230VAC 50Hz.

Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 3L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.

These 7/16 x 24 inch stainless steel support rods screw into the base of Corning® PC-600/610/620 series hot plate/stirrers.

(This is the suggested replacement for 2028) 2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray…

Features large knurls for ergonomic handling Contains hydrophobic membrane for applications requiring gas exchange Sterilized by gamma radiation Does not fit 490cm2 roller bottles

Ribbed design provides twice the surface area with the same exterior dimensions. Bottles are manufactured from virgin polystyrene, caps from high density polyethylene Both resins meet the USP Class VI requirements for plastic containers and closures Treated with a Corning® CellBIND® surface treatment for enhanced cell attachment One piece seamless construction with printed graduations Printed lot numbers to aid in produ…

Bottles are manufactured from virgin polystyrene, caps from high density polyethylene Both resins meet the USP Class VI requirements for plastic containers and closures Treated for optimal cell attachment One piece seamless construction with printed graduations Printed lot numbers to aid in product traceability Sterilized by gamma radiation and certified nonpyrogenic

Easy Grip Vent Cap is designed for applications requiring consistent gas exchange and features large knurls designed for ergonomic handling Bottles are manufactured from virgin polystyrene, caps from high density polyethylene Both resins meet the USP Class VI requirements for plastic containers and closures Treated with a Corning® CellBIND® surface treatment for enhanced cell attachment One piece seamless construction wi…

Bottles are manufactured from virgin polystyrene, caps from high density polyethylene Both resins meet the USP Class VI requirements for plastic containers and closures Treated with a Corning® CellBIND® surface treatment for enhanced cell attachment One piece seamless construction with printed graduations Printed lot numbers to aid in product traceability Sterilized by gamma radiation and certified nonpyrogenic Easy Gr…

For use with 150 mL filter funnels, 100 per case

For use with 250 mL filter funnels, 100 per case

For use with 500 mL filter funnels, 100 per case

For use with 1000 mL filter funnels, 100 per case