General Lab Products & Reviews

The SHEL LAB large capacity CO2 incubators are well-suited for roller bottle apparatus and high-volume tissue culture applications and is ideal for cell harvesting This large capacity incubator maximizes laboratory space in a convenient floor model design. Its chamber floor is specifically designed for easy movement of roller bottle apparatus by use of a flip-out ramp. Supplied with four one amp interior electrical outlets an…

Models SMI31 and SMI39 incubators provide 30.8 & 38.4 cu.ft. chamber capacities while minimizing the amount of floor space used Both models incorporate our microprocessor controller to achieve precise temperature uniformity. An independent, secondary temperature controller offers the added security of over temperature protection. The chamber floors are reinforced to support roller apparatus or shakers. Both models are supplie…

SHEL LAB CO2 Incubators offer dependable Infrared (IR) CO2 Sensor control and are ideal for sensitive tissue and cell culture applications. They provide the benefits of contamination control and uncompromising temperature uniformity for even the most demanding incubations. Precision is easily maintained with push-button calibration of both temperature and CO2, and audio/visual alarms that signal high/low temperature and CO2 c…

The VOC Pak is designed to produce water with VOC concentration below the analytical detection limit. VOCs are industrial contaminants that may cause health safety issues and therefore should be detected in the environment. VOCs are routinely analyzed in water, soil, gas and air. Specifications for VOCs in drinking water have been established by different regulatory agencies in many countries.The VOC-Pak cartridge is designed…

Simple design, reliable dispense   Features: Easy to load — Simple loading and unloading of refill pack at any point during use No jamming — Guide plates assist loading and keep refill web in alignment during use to avoid jamming of the instrument Soft touch keypad — Aseptically dispense a disc of membrane at the touch of a button Designed to hold 200 membrane discs — Saves time by eliminating interruptions t…

TAP recommend their plate heater to ensure precise temperature control and optimise the production of RAFT 3D cell cultures in plates. It has been specifically designed for use in a laminar flow cabinet and can be easily sprayed and cleaned. The heater is also suitable for general lab use, eg assay incubations.

Anaerobic workstation with large 30 litre airlock and optional refrigeration

Designed for Use with the New Sentino Microbiology Pump • Variety of sizes - Available in 150, 300, and 500 mL. Convenient 150 mL size easily fits into small autoclaves; 500 mL size is ideal for large sample filtration.• Easy to use - No-leak magnetic seal allows one-handed operation• Safe to use - Sturdy, polyphenylsulfone plastic construction is shatterproof and offers broad range of chemical compatibility• Simple placement…

NEW MODEL Very resistant bottles, ideal for liquid or powders. Wide mouth for easy filling and emptying. lnsert seal for completely leakproof closure. Caps can be wired down for safety. Tommy bar lugs on 10 litre capacity to assist release. Complete with carrying handles. Manufacturer reference:(Codes) Art. 1640, 1642.

NEW MODEL Very resistant heavy-walled carboy bottles. O-ring seal cap make them suitable for developed pressure vessels. The cap can be wired down for added safety. Complete with carrying handles.Manufacturer reference:(Codes) Art. 1644, 1646, 1648, 1650.

NEW MODEL Designed for life time service. Can be used in sub zero temperatures. Very sturdy having thick walls whilst retaining translucency. The 3/4” BSP spigot (supplied) mates with a 12 mm deep thread in the aspirator for total leakproof performance. Recommended that a few drops of vaseline be put on the thread before assembly.Manufacturer reference:(Codes) Art. 1660, 1662, 1664, 1666.

Slide Storing System The basic unit has five drawers. Additional drawers can be added by removing the top lid, locating the drawer with the four dowels provided and replacing the lid. The maximum number of drawers is dictated by the height of the user. Castors can also be used to create a movable station. Each drawer can accommodate 10 slide supports. For individual components reference manufacturer catalogue:(Code) Art. 920…

Cylindrical Jars with Ribbed CapsThe cylindrical jars are supplied with insert and cap.Thanks to the large neck they are suitable for powders, solid specimen, creamy or semisolid substances, crystals and hygroscopic substances. Suitable for foodstuff. For reference about capacity please refer to the manufacturer:(Codes) Art. 1563, 1564, 1565, 1566, 1567, 1568, 1569.

Ideal for storing mercury etc. Leakproof. Small quantities of liquid or solid samples can be taken out by pipette/spatulas without the hindrance of internal shoulders. Sturdy, heavy walled with excellent chemical resistance. Suitable for foodstuff. Manufacturer reference:(Codes) Art. 910, 911, 912, 913, 914, 915, 916.

Micro test tubes with caps made of HDPE for Cobas Bio® and Cobas Mira® automatic analyzers. Available in four colours. Manufacturer references:(Codes) Art. 2940-00, 2940-04, 2940-06, 2940-13.

Ideal for samples analysis. Depending on centrifuge being used, these tubes can withstand a centrifugal force of up to RCF 11.000 max. Flat cap with writing area. Available in: neutral, blue, yellow, pink and green colours.Manufacturer references:(Codes) Art. 279.

Unique, dual level design for holding 20 tubes in pre-numbered cavities (1-10; 11-20). Racks have locations on the base to enable attachment in rows or back to back to each other using optional linking clips. Excellent for preparation work. Racks are autoclavable.Manufacturer references:(Codes) Art. 295, 296.

Bold Line CO2 Unit, controls both air and CO2. The Bold Line Controllers can be operated as standalone units or in combination with each other through cabeless connection. Bold Line CO2 Unit Controller Features: Adds CO2 in Air or in N2 Range: 0-18% Accuracy: ± 5% of CO2 concentration, i.e. ± 0.25% at 5% CO2 Set Point Resolution: 0.1% Repeatability: better than 0.1% Total flow rate: 0.2-0.8 Nl/min Outlet press…

Bold Line O2 Unit Controller for Hypoxia. The Bold Line Controllers can be operated as standalone units or in combination with each other through cabeless connection. Bold Line O2 Unit [1-20] Features: O2 Concentration range: 1-20% Adds N2 to Air O2 Range: 1-20% Accuracy: ± 0.1% at 5% of O2 Repeatability: 0.05% of O2 Set Point Resolution: 0.1% Total flow rate: 0.2-0.8 Nl/min Outlet pressure: ambient N2 consu…

Bold LIne CO2 and O2 Unit [0-10;1-18]  controller for Hypoxia conditions. The Bold Line controllers can be operated as standalone units or in combination with each other through cabeless connection. Bold Line CO2 and O2 Unit [0-10;1-18] Controller Features: CO2 range: 0-10% - O2 range: 1-18% Adds CO2 and N2 to Air CO2 range: 0-10% O2 range: 1-18% CO2 accuracy: ± 5% of CO2 concentration, i.e. ± 0.25% at 5% CO2 O2…

Bold Line CO2 - O2 Unit [0-20;1-95] Contoller for Hypoxia and Hyperoxia. The Bold Line Controllers can be operated as standalone units or in combination with each other through cabeless connection.Bold Line CO2 - O2 Unit [0-20;1-95] Controller Features: CO2 range: 0-20% - O2 range: 1-95% Mixes CO2, O2 and N2 CO2 range: 0-20% O2 range: 1-95% CO2 accuracy: ± 0.3 % at 5% CO2 and 5% O2 O2 accuracy: ± 0.2% at 5% CO2 an…

Bold Line CO2 - O2 Unit [0-10;0-1] Controller for very low oxygen concentrations. The Bold Line Controllers can be operated as standalone units or in combination with each other through cabeless connection. Bold Line CO2 - O2 Unit [0-10;0-1] Controller Features:  CO2 range: 0-10% - O2 range: 0-1% Adds CO2 and Air to N2 CO2 range: 0-10% O2 range: 0-1% CO2 accuracy: ± 5% of CO2 concentration, i.e. ± 0.25% at 5% CO2…

Bold Line CO2 - O2 Unit CP Controller. This Gas Controller supplies desired Air-CO2 or N2-O2-CO2 mixture at controlled pressure. Bold Line CO2 - O2 Unit CP Controller Features: It replaces pre-mixed tanks One unit supplies up to 10 microscope incubators Ideal for imaging facilities Mixes two or three gas, according to operator's need Bold Line CO2 - O2 Unit CP Controller Technical Specifications: Operation mode…

Cryo Express (CX) “dry shippers” are designed to safely transport a variety of materials at cryogenic temperatures. The unique absorbent material prevents a liquid spill if the unit is tipped over. Storage temperature inside the shipping cavity remains at approximately -190˚C until the liquid nitrogen evaporates from the absorbent material. CX & CXR Series Features: Advanced Concept Absorbent enables faster charging Co…

The Extended Time Series (XT) Series of cryogenic refrigerators are designed for long-term storage of a variety of materials at cryogenic temperatures. This series also offers low profile models (XTL), with 5” canisters. XT Series Features: New Rugged Construction – ribbed high strength aluminum body, magniformed necktube design, and more durable paint Versatile storage system – convenient canister numbered index location…