Trusted information for laboratory scientists on General Lab products and techniques on SelectScience, including incubators, autoclaves, light microscopy and pH meters.
The Tube Rack is ideal for sample processing and the short or medium-term storage of samples. As it can withstand temperatures as low as -80°C, the rack can also be stored in a freezer. Tube racks are available for 0.5 ml test tubes as well as for 1.5 m-2.0 ml test tubes. Tube Racks can be stacked even when fully loaded and can be coupled to other racks on all sides. They are also UV-resistant and fully autoclavable and have l…
BIGNEAT Biological Safety Cabinets meet all the requirements of European EN12469:2000 Standard. Great features for the comfort of the operator include: Ergonomic design Clear well lit view of the working area Quiet operation Easy clean surfaces BIGNEAT products are built using only the best available materials and using the latest manufacturing techniques to give a quality, long lasting finish - equipment that will…
BIGNEAT Class I cabinets draw air past the operator and exhaust through the top of the cabinet, a negative pressure is maintained within the cabinet ensuring containment integrity. Built to European EN12469:2000 standard Key features Available as ducted or recirculatory filtration models (recirc model shown) Efficient insulation, sound levels less than 55dB(A) Internal illumination greater than 750 Lux State-of-the-…
6 boreholes for different tubes (max. tube size: 85 ml) Max. rotational speed: 11,000 rpm (max. rcf: 15,550 x g) When used in Centrifuge 5810 R: max. rotational speed 12,000 rpm (max. rcf: 18,500 x g) Conical tubes such as 15 ml and 50 ml Falcon® tubes can be centrifuged with adapters in the fixed-angle rotor1) Rotor, caps, adapters are autoclavable (20 min, 121°C) 1) Please observe the limits for tube load-bearing…
Aluminum rotor available with 10 or 30 steel sleeves depending on number of samples Centrifugation of 15 ml Falcon® tubes and glass test tubes Inserts supplied allow symmetrical heterogeneous loading Max. speed of 4,400 rpm (max. rcf of 2,750 x g) ®: Registered trademark of Becton Dickinson
4 x 100 ml rectangular buckets for high capacity Flexible adapters for a wide range of tubes Max. rotational speed: 5,000 rpm (max. rcf: 4,500 x g) Caps for aerosol-tight centrifugation* Rotor, buckets, caps, and adapters are autoclavable (20 min, 121°C) Also available with four buckets for conical 50 ml tubes * Tested by the Centre for Applied Microbiology & Research, CAMR, Porton Down, Great Britain.
All-in-one rotor cross for 4 x 250 ml rectangular buckets and 4 microtiter-plate buckets Flexible adapters for a wide range of tubes Swing-bucket rotor with rectangular buckets: max. rotational speed: 4,000 rpm (max. rcf: 3,200 x g) Rotor, buckets, rectangular buckets, caps, and adapters are autoclavable (20 min, 121°C) Caps for aerosol-tight centrifugation* * Tested by the Centre for Applied Microbiology & Research…
Swing-bucket rotor A-4-62 can be up-graded with 4 MTP buckets to the MTP rotor A-4-62-MTP For up to 16 microtiter plates or 12 culture plates or 4 deepwell plates Swing-bucket rotor with microtiter-plate buckets: max. rotational speed: 4,000 rpm (max. rcf: 2,750 x g) * Tested by the Centre for Applied Microbiology & Research, CAMR, Porton Down, Great Britain.
Swing-bucket rotor A-4-81 can be up-graded with 4 MTP buckets to the MTP rotor A-4-81-MTP For up to 16 microtest plates or 12 culture plates or 4 deepwell plates and all plate stacks of the Perfectprep® Plasmid Kit The functional range in comparison to the A-4-81 MTP can be expanded upon with flex buckets Swing-bucket rotor with microtest plate buckets: max. rotational speed: 4.000 1/min (max. rcf: 2.900 x g)
All Priorclave autoclaves carry one of the most supportive Service and Warranty agreements available - made possible due to quality precision build standards combined with using the very best materials to create the most reliable and efficient steam sterilisers. Strength in design is proven by the fact that a large number of autoclaves supplied in the early years of the company are still performing exceptionally well after 23…
digestec DAB-2/3, to Digest the Hardest Samples. The traditional “stainless steel bomb” with its PTFE insert is being increasingly replaced by the microwave for most routine applications. However, when it comes to difficult-to-digest samples such as silicon carbide or alpha-aluminium oxide, such systems remain of inestimable value to users. The great advantage of these systems lies in the fact that the digestion period can…
Lightweight, silicone body conforms to assure the highest level of comfort and eye protection from impacts and chemical splashes Cured silicone body stays soft and supple in extreme temperatures Low profile and optically correct polycarbonate lens provides full field of vision Uvextreme® anti-fog coating and indirect venting system minimizes fogging Fits over most prescription eyewear Pivoting clips permit the…
Cluster tubes are composed of 1.2 mL 96 individual polypropylene tubes are designed to fit in a standard 96 well microplate format Does not include rack Polyethylene tube caps are available in 8-cap strips (Corning No. 4418)
Bulk packed polystyrene pipets are ideal for large-scale sterile and nonsterile liquid handling applications. Unique color-coded magnifying stripe for easier meniscus viewing. Sterile and certified nonpyrogenic and DNase-/RNase-free Accuracy within ± 2% at full volume Calibrated to deliver (TD-EX 20ºC) their contents with blowout.
Banana-peel plastic wrap features easy opening for aseptic removal and eliminates static cling when wearing latex gloves. You can see the polystyrene pipet through the clear plastic wrap for instant size identification. Plus, space saving packaging reduces storage requirements, waste, and one material makes it easy to recycle.New anti-static clear all-plastic wrap allows full view of pipet for easy size identification and redu…
Application The MagNA Pure LC O-Ring Maintenance Kit is used for the manual greasing of the O-Rings. Product Description Regular greasing prolongs the lifetime of the nozzle-head O-Rings of the MagNA Pure LC Instrument, and ensures pipetting accuracy. In addition to greasing, it is necessary to replace the O-Rings periodically. Contents O-Rings, 12 x 8 O-Rings Grease, 1 vial
Application The MagNA Pure LC Waste Bottle is used for the collection of liquid waste by the MagNA Pure LC Instrument. The Waste Bottle is suitable for collecting 330 ml of liquid waste. Quality The MagNA Pure LC Waste Bottle is guaranteed to be inert to most chemicals used in life-science laboratories.
Additional Elution Tube Rack for use with the MagNA Pure Compact Instrument.
Additional Cartridge Rack for use with the MagNA Pure Compact Instrument.
The range includes:PipettesCylindersFlasksAutomatic BurettesFlat GlassAccessoriesMiscellaneous ProductsVisit the website to find out more!
