Cannabis testing is a process that evaluates the safety, potency, and quality of cannabis products for medical and recreational use. Through rigorous analysis, cannabis testing laboratories assess factors such as cannabinoid content, terpene profiles, and levels of contaminants like pesticides and heavy metals. By ensuring compliance with regulatory standards and consumer safety, cannabis testing plays a crucial role in promoting transparency and confidence in the burgeoning cannabis industry. Explore how cannabis testing laboratories contribute to delivering reliable and high-quality cannabis products to consumers worldwide.
This method is based on the fluorescence of SO2 due to absorption of ultraviolet (UV) energy. A UV lamp emits ultraviolet radiation that passes through a filter which excites the SO2 molecules and produces light which is measured by a photomultiplier tube (PMT). UV Fluorescence Analyzer(s) Highlights: New Compact PMT Integrated PMT Peltier Cooling 10,000 Hour Ultraviolet Lamp Optional CO2 or O2 Channel Compact Size…
FTIR Spectroscopy is an analytical technique which measures the infrared intensity versus wavelength (wave number) of light. The FTIR Spectrometer obtains infrared spectra by collecting an interferogram of a sample signal with an interferometer. FTIR Analyzer(s) Highlights: No Liquid Nitrogen Required Compact, Industrial Design w/Fast Repsonse Proven Rugged Interferometer with Gold Mirrors Heated Standard Stainless St…
In Photoacoustic Spectroscopy (PAS) the gas to be measured is irradiated by modulated light of a pre-selected wavelength. The gas molecules absorb some of the light energy and convert it into an acoustic signal which is detected by a microphone. Photoacoustic IR Analyzer(s) Highlights: Low Sensitivity (From ppb to Percent Levels) Yearly Calibration Minimal Maintenance Measures up to Five Gases + H2O Temperature and…
The CAI NOxBox system has been specifically designed for harsh environment condition s frequently found in outdoor selective catalytic reactor applications. The analyzer system is housed in a Nema 4 enclosure with a front lockable door. The enclosure contains a heating and cooling system to maintain a constant internal temperature for the gas analyzer and interface equipment regardless of outside environmental effects. The sa…
The CAI Mark 3 Intelligent Sampling System is a third generation single board computer controlled industrial sequencer. The system has been developed over many years as higher specifications components have been added to the proven single board computers on the Mark 1 and Mark 2 Samplers. These have been in production for over 15 years. CAI specialize in custom building these systems and are able to modify and write special s…
Pellet Press – ideal for the preparation of high-quality pellets! - Manual. Hydraulic. Easy! Manual hydraulic Pellet Press for the preparation of pellets with a smooth, homogeneous surface for spectral analyses such as X-ray fluorescence analysis or infrared spectroscopy for elementary analysis. Ideal for the manufacturing of both: solid and highly permeable pellets of solid samples – fast and easy. Pellet press – ideal for hi…
PC/Chrom is a complete package that interfaces your GC or HPLC detector to your personal computer or to a corporate network server. PC/Chrom reads the analog output signal from the detector, digitizes the signal, displays the chromatogram, and processes the data according to user specifications to produce a final report that can be printed. All hardware and software is included in the PC/Chrom package, including power supply a…
Labformatics Balanced Scorecard Approach combines the laboratory performance measurement service suite of Labformatics with the powerful CorStrategy Balanced Scorecard engine from CorVu plc. Over 65% of Fortune 500 organisations are thought to use the Balanced Scorecard approach as part of their business performance management activities. Labformatics Balanced Scorecard Approach is the only product specifically designed fo…
Fully automatic refractometer. Measures refractive index and Brix
Coulometric Electrochemical Cells- The Key to Enhanced Selectivity Coulochem cells are unique in their design, employing the patented ESA flow-through porous graphite electrode. These low-volume analytical cells contain two working electrodes. The high surface area of each electrode results in 100% reaction of the electroactive compound. The first (screening) electrode can be used to eliminate potentially interfering com…
Ready-to-use dialysis device with a broad built-in range of precise MWCO's and all the needed accessory components built in for ultimate convenience. Features leak proof and re-sealable snap-on cap for sampling, colour coded dot for MWCO, broad floatation disk for buoyancy, 6 volume-specific size, 2 membrane types- biotech grade regenerated cellulose (RC) and biotech grade cellulose ester (CE).
This extremely low drift and ultra low noise conductivity detector, may be purchased separately
The new Cecil DC, scanning DC and pulsed amperometric electrochemical detector
Extremely accurate refractometer for gases and anaesthetic gas mixtures
Two new additions to the SNAP CAP™ range. These caps are pre-cut to avoid any vacuum generation problems.
This competitively-priced, single-channel dissolved oxygen meter is easy to set up and use while providing reliable, accurate DO measurement for water analysis and general laboratory applications. The rugged meter displays DO concentration or percent DO Saturation and offers a full complement of GLP-related features. It offers enhanced stability indicators, salinity correction and automatic barometric pressure compensation—…
This waterproof, battery-operated DO meter stands up to the most demanding water analysis applications and delivers over 2,000 hours of continuous operation. Convenient Quick-Start Guide is located on the back of the meter to make the unit easy to operate in the field. The rugged meter displays DO concentration or percent DO Saturation and offers a full complement of GLP-related features. It offers enhanced stability indica…
This waterproof, battery-operated pH/DO meter stands up to the most demanding water analysis applications and delivers over 2,000 hours of continuous operation. Convenient Quick-Start Guide is located on the back of the meter to make the unit easy to operate in the field. The rugged meter displays DO concentration or percent DO Saturation and offers a full complement of GLP-related features—including available 21 CFR Part 11…
Biochemical oxygen demand (BOD) determination is still one of the most important parameters in water resource management. It can be used to evaluate the impact of biodegradable substances in waters and waster water. With its OxiTop ® systems, WTW offers a unique, modular and mercury-free instrument system. It is not only suitable for BOD determination, but also for measuring biodegradability and deple-tion.The advantages of Ox…
Complete packages for 6 or 12 simultaneous measurementsMeasurement using OxiTop ® is based on pressure measurement in a closed system: microorganisms in the sample consume the oxy-gen and form CO 2 . This is absorbed by NaOH, creating a vacuum which can be read directly as a measured value in mg/l BOD.The used sample volume regulates the amount of oxygen available for a complete BOD. Measurement ranges of up to 4,000 mg/l can…
Complete package for 6 or 12 simultaneous measurements – For a larger number of samples and with simple sample measurement OxiTop ® Control is the logical further development of the successful OxiTop ® system using software-controlled functions and infrared interface to communicate with a handy controller, the OC 100. This system enables the simultaneous and grouped start, management, storage and tracking of 100 measuring head…
common featuresSimultaneous sample management with option of grouping up to 100 OxiTop ® -C measuring heads.Data call-up of one parallel sample with statistical evaluation and as individual data.Automatic calculation and graphical display of BOD value.Data transfer even through glass doors.Protocol and documentation of data via Achat OC commu-nication program in combination with a PCGLP and AQS with inspection intervals for ca…
Instead of the display and keys, the OxiTop ® -C measuring head has an infrared interface with which it communicates with Controller OC 100 or OC 110. By "e;pointing"e; the controller at an OxiTop ® -C measuring head it can be identified and started, data can be called up or deleted and sampling progress can be displayed.Each measuring head has its own identification number; this means that manual identification of samples is…
