Analtech Inc. Forensics Products & Reviews

The CycloGraph system is a centrifugally accelerated device for performing preparative thin layer radial separations. The separations occur quickly (within 20 minutes) with no need for scraping separated bands as with traditional Thin Layer Chromatography. Principle of Operation The compound to be separated is applied as a solution inside the adsorbent ring of the pre-cast Rotor (Analtechs prepared consumable for this device)…

Silica Gel G & GF UNIPLATES are the most widely used silica gel TLC plates. No organic substances are added to these products, thus making them compatible with sulphuric acid charring visualization. These plates are commonly scraped from the glass backing to isolate separated components for other analytical procedures.

Silica Gel G & GF UNIPLATES are the most widely used silica gel TLC plates. No organic substances are added to these products, thus making them compatible with sulphuric acid charring visualization. These plates are commonly scraped from the glass backing to isolate separated components for other analytical procedures.

Silica Gel G & GF UNIPLATES are the most widely used silica gel TLC plates. No organic substances are added to these products, thus making them compatible with sulphuric acid charring visualization. These plates are commonly scraped from the glass backing to isolate separated components for other analytical procedures.

Analtech Reversed Phase Separation (RPS) UNIPLATES offers several advantages over the bonded RP18 type TLC plates. RBS UNIPLATES are a hydrocarbon impregnated silica gel. The hydrocarbon is adsorbed onto the silica gel surface and is not chemically anchored to the particle. The main advantages of the hydrocarbon impregnated Reversed Phase plate are compatibility with aqueous solutions and parallel behavior to most C18 HPLC pac…

The UNIPLATE-T Taper Plate, invented and patented by Analtech, is a unique preparative TLC plate that provides unusually high resolution for a preparative layer. It has a wedge-shaped adsorbent layer, progressing from 300 microns (bottom) to 1700 microns (top). Below the silica layer is a 700-micron-thick pre-absorbent zone provided for easier sample application and higher sample resolution.

Analtech's glass TLC developing chambers provide optimum developing conditions for a variety of TLC plate sizes and shapes. Precision ground surfaces provide tight seals between tanks and glass covers, permitting complete saturation of chambers with solvent vapour for uniform development of chromatograms.

Analtech's glass TLC developing chambers provide optimum developing conditions for a variety of TLC plate sizes and shapes. Precision ground surfaces provide tight seals between tanks and glass covers and permit complete saturation of chambers with solvent vapour for uniform development of chromatograms

The TLC AUTOSPOTTER is a semi-automated device used to apply samples on Thin Layer Chromatography plates. The instrument eliminates the need for manual sample application and can be used to apply up to 18 samples at a time.