Comprehensive Target and Suspect Screening of Pesticides in Surface Waters – Implications for the Assessment of Surface Water Quality

Discover how surface waters can be effectively screened to assess and safeguard water quality, according to the European Water Framework Directive (WFD)

25 Oct 2016
Weylan Kiam-Laine
Microbiologist

Editorial article

Pesticides used in agriculture can be transported during rain events to surface waters where they can have adverse effect on aquatic organism even at low concentrations. Thus, regular monitoring of pesticides in surface water is an important consideration for safeguarding water quality.

In Europe, pesticides with high application rate, mobility, persistence and toxicity are typically included in monitoring campaigns along with the regulated priority substances as defined in the WFD in order to assess the water quality. As new pesticides are constantly released on the market and the pesticide use pattern can vary strongly on a regional scale, the adjustment of monitoring program to river basin specific pesticides is challenging and relevant pesticides can be easily overseen. The goal of this study was to perform a complete analytical pesticide screening, assess the associated risk for the aquatic environment and compare this with the risk obtained when only the subset of pesticides as required by the WFD is analyzed.

Five rivers impacted by agricultural activities in the Swiss plateau were investigated. Biweekly composite water samples were analyzed over 6 months by a screening method using solid phase extraction (SPE) liquid chromatography coupled to high resolution tandem mass spectrometry (LC-HRMS/MS, Thermo Scientific™ Q Exactive™ MS). The acquired data were processed using a target and suspect screening approach. Using this method, 86% (310) of all registered synthetic organic pesticides in Switzerland (310) could be detected at low concentrations (0.5-10 ng/L).

The results of the complete screening showed that on average 30-40 pesticides were detected per sample. The sum of individual risk quotients following the concept of concentration addition for plants and invertebrates exceeded the critical value by factors of 4-6 and 2-3, respectively. It was found that only 50% of the detected substances would have been measured given a subset of 30-40 investigated pesticides. Approximately 35% of the total risk, especially the risk caused by insecticides, would not have been detected with a reduced monitoring program because relevant substances such as neonicotinoids would not have been included in the subset of analytes. The findings demonstrate that a complete pesticide screening is necessary to reliably represent the water quality of a river.

View the full presentation here.

Tags

LC-MSLC-MS (liquid chromatography-mass spectrometry) systems and equipment are used for separation and quantitative analysis of complex mixtures, combining liquid chromatography and mass spectrometry. Quantify proteins, contaminants, pesticides or screen for drug metabolites with a high level of sensitivity. LC-MS systems and equipment include reverse phase, normal phase and specialized columns integrated with various MS detectors such as time-of-flight (TOF), quadrupole, orbitrap or ion trap mass analyzers. LC-MS/MS instruments equipped with a qTOF or triple quadrupole analyzer give greater sensitivity and resolving power to your analysis. Find the best LC-MS equipment in our peer-reviewed product directory: compare products, check customer reviews and receive pricing direct from manufacturers.Environmental Monitoring and TestingEnvironmental monitoring and testing uses handheld portable analyzers, kits, spectrometers or chromatography systems for air, water, soil, food and other sample testing. Useful features of analyzers such as BOD and COD include portability, easy calibration, automation and sensitivity.  Environmental test kits for pH, water, moisture, etc, should be accurate, sensitive, reliable, fast and easy to use.PesticidesPesticides are used to protect crops from diseases, pests and unwanted plants. They are classed as persistent organic pollutants (POPs) and can be harmful to humans. The Environmental Protection Agency (EPA) currently regulates the use of pesticides in the USA. Water AnalysisAnalytical methods used to test the purity of drinking water include determining the level of contaminants abides to the level set by the Environmental Protection Agency (EPA).Solid Phase Extraction (SPE)Solid phase extraction (SPE) is a sample preparation technique used to separate and concentrate analytes from complex mixtures. It is widely used in environmental, pharmaceutical, and clinical analysis. SPE provides higher sensitivity and selectivity compared to traditional liquid-liquid extraction methods, making it essential for accurate and reproducible results. Explore SPE tools and systems in our peer-reviewed product directory; compare products, check reviews, and get pricing directly from manufacturers.
Comprehensive Target and Suspect Screening of Pesticides in Surface Waters – Implications for the Assessment of Surface Water Quality