LentiFuge™ viral concentration provides a simple, rapid, and effective method to increase the amount of lentiviral particles collected from cell culture supernatants using standard high-speed centrifugation. It works by aggregating viral particles so that upon high speed centrifugation, so the virus can be precipitated and isolated without use of an ultracentrifuge. LentiFuge is a sterile, cell culture grade reagent that is…
The ChIPAb+ Acetyl-Histone H3 (Lys9) set includes the anti-acetyl-histone H3 (Lys9) antibody, a negative control antibody (purified Rabbit IgG), and qPCR primers flanking an Sp1 binding site in the human p21 (WAF1/CIP1/CDKN1A) promoter, amplifying a 105 base pair PCR product. The acetyl-histone H3 (Lys9) and negative control antibodies are supplied in a scalable "per ChIP" reaction size and can be used to functionally validate…
CHEMICON®'s Osteogenesis Quantitation Kit provides all the necessary reagents and a protocol to enable quantification of osteogenesis using a standard plate reader. This product is useful for studying the effects of growth factors, drugs and toxic agents on bone formation and for screening candidate osteogenic pharmaceuticals. Also, studies examining the intracellular signaling pathways regulating osteoblast differentiation ca…
5 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…
2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…
The Photomultiplier is a turnkey detector with a low noise, high sensitivity system that exceeds the performance of silicon photodiode systems over the wavelength range 185 to 800nm. It has a superior combination of a large, 8mm diameter, aperture and fast response of 10 microseconds. The convenient controller provides 11 gain seconds over an amplification range of 102 to 106 and includes a detector overvoltage protection circ…
The Ultra line represents Restek’s broadest selection of stationary phases on a single silica support. Made of high-purity, type-B silica that minimizes activity and creates high-density bonding, Ultra Silica Columns (USP L3) are designed for selective and reliable HPLC applications. Particle size: 3 μm or 5 μm, spherical Pore size: 100 Å End-cap: no pH range: 2.5 to 8 Temperature limit: 80 °C USP phase code: L3 Phase catego…
2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…
2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…
2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…
2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…
2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…
These 100 mL PYREX® Kjeldahl flasks have tooled finished necks for extra strength and uniform rubber stopper (No. 2) fit. Wall thickness is controlled to offer the optimum balance between thermal shock and chemical resistance. They can be used in ASTM E-258 procedures. Care must be taken to ensure the bottoms of the flasks do not come in contact with the heating elements. Most Kjeldahl equipment manufacturers have ring support…
These 300 mL PYREX® Kjeldahl flasks have tooled finished necks for extra strength and uniform rubber stopper (No. 5) fit. Wall thickness is controlled to offer the optimum balance between thermal shock and chemical resistance. They can be used in ASTM E-258 procedures. Care must be taken to ensure the bottoms of the flasks do not come in contact with the heating elements. Most Kjeldahl equipment manufacturers have ring support…
These 800 mL PYREX® Kjeldahl flasks have tooled finished necks for extra strength and uniform rubber stopper (No. 7) fit. Wall thickness is controlled to offer the optimum balance between thermal shock and chemical resistance. They can be used in ASTM E-258 procedures. Care must be taken to ensure the bottoms of the flasks do not come in contact with the heating elements. Most Kjeldahl equipment manufacturers have ring support…
These sterile disposable 1 mL PYREX® serological pipets are designed for the larger-volume user. They have a finer 0.01 mL graduation interval and are calibrated (TD) with blow-out. They are packed to permit easy access to several pipets at a time without contaminating the entire case. Similar to No. 7077, except multi-packed in plastic bags. New I.S.O. color-coding is printed directly on the tear strip for easy identification…
These sterile disposable 1 mL PYREX® serological pipets are designed for the larger-volume user. They have a standard 0.1 mL graduation interval and are calibrated (TD) with blow-out. They are packed to permit easy access to several pipets at a time without contaminating the entire case. Similar to No. 7077, except multi-packed in plastic bags. New I.S.O. color-coding is printed directly on the tear strip for easy identificati…
AireGard model NU-140 by NuAire Laboratory Equipment is a Vertical Laminar Airflow Workstation (LAFW) designed to provide product through HEPA filtered airflow in a laminar pattern over the work surface. Model NU-140 is available in four different widths [3, 4, 5 and 6-foot (0.9, 1.2, 1.6, and 1.8 m)] and comes standard as a bench top design with optional base stand configurations such as telescoping (pick your work surface he…
Formulated with diagnostic kit developers in mind, RapiDxFire™ qPCR 5X Master Mix glycerol free (GF) can be combined with gene-specific primers and hydrolysis probes for immediate use in high-throughput laboratory developed test (LDT) workflows or further processed for lyophilisation for use in point of care (POC) devices. Provided at a 5X concentration without passive reference dye, this flexible master mix allows more room…
Irish Life Sciences 2.2ml square well 'V' bottom plate is manufactured in a class 8 cleanroom using a medical-grade polypropylene. The plate has been developed to enable the base of the well to be in contact with heater-shaker blocks which improves the performance of the process. The plate also conforms to the footprint dimensions defined by SLAS/ANSI standards. This guarantees its compatibility with both manual and automated…
Irish Life Sciences 2.2ml square well 'U' bottom plate is manufactured in a class 8 cleanroom using a medical-grade polypropylene. The plate has been developed to enable the base of the well to be in contact with heater-shaker blocks which improves the performance of the process. The plate also conforms to the footprint dimensions defined by SLAS/ANSI standards. This guarantees its compatibility with both manual and automated…
Bruker’s Universal Mechanical Tester (UMT) platform has been the most versatile and widely used tribometer on the market since the first model debuted in 2000. Newly designed from the ground up, the UMT TriboLab has a unique modular concept that harnesses more functionality than ever before. In fact, the UMT TriboLab offers higher speeds, more torque, and better force measurement than any of its competitors, plus it introduce…
2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…
5 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…
4 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…
