Search results for "rotary vane pump"

AstraTint is an advanced fibre optic coupled spectrophotometer that is dedicated to colour measurement and comparison; its high resolution CCD array detector making measurements in less than 2 seconds. AstraTint shows the sample’s position in the CIE colour space in the lower half of the screen with the L*, a*, b* and x, y, z co-ordinates to the right. If a reference has been measured the values are stored and displayed abov…

J.G. Finneran's Versa Vial™ has a vase-like neck that allows pick up with an autosampler's robotic arm.  The 1.5mL polypropylene vial offers the largest capacity available for a 12x32mm plastic vial.  The vial is available with the 11mm crimp, 9mm and 8mm screw thread finishes.  The new design also accommodates a variety of plug sealing methods: PTFE/Silicone PlugPTFE/Silicone Plug with SlitSiliconized Gray Chlorobutyl PlugPo…

High quality, PC based video imaging system for rapid and simple acquisition and analysis of images from fluorescent or visible stained gels and blots, autoradiograms and colony plates. High performance, low noise, SONY 8-bit camera. Top quality darkroom cabinet with rigid metal construction for many years of reliable and efficient service, includes: transilluminator on pull out tray uniform overhead (epi-) w…

VER-O157 test is an immunochromatographic rapid assay for the qualitative detection of E.coli O157 and verotoxins 1 and 2 (syn. shigatoxins) from a stool enrichment in mTSB broth. VER-O157 test employs a combination of:Green latex-conjugated monoclonal antibody against E.coli O157 antigen, and a solid-phase specific E.coli O157 antibodyRed latex-conjugated monoclonal antibodies against the verotoxins 1 and 2 antigens, and sol…

9 liters in 1 hour; 7500 dishes per day. High productivity and automation are the keywords for this media preparation system. The MP 9 Media Preparator offers: - Prepares 1 to 9 liters of high quality agar or broth - Produces enough for 530 x 90 mm dishes; 40 x 225 mL bottles/flasks - Automation from powder to fresh media - Homogenization, heating, sterilization, cooling and holding at pouring temperature - Accurate temperatur…

SPRimager®II ARRAY INSTRUMENT from GWC TEchnologies GWC’s SPRimager®II is designed for analysis of molecular interactions in an array format. The entire array is exposed to the same analyte in the 1-cm flow cell, eliminating the channel-to-channel variability inherent in multichannel systems, and allowing for simultaneous capture of data for all probes on the array.The SPRimager®II uses Surface Plasmon Resonance imaging (SPRi)…

Chemicon's V1A membrane preparations are crude membrane preparations made from our proprietary stable recombinant cell lines to ensure high-level of GPCR surface expression; thus, they are ideal HTS tools for screening of V1A interactions with its ligands. The membrane preparations exhibit a Kd of 55 pM for [125I]-vasopressin antagonist ([125I]-phenylacetyl-D-Tyr(Me)-Phe-Gln-Asn-Arg -Pro-Arg-Tyr-NH2). With 10 µg/well V1A Membr…

The Pippin Prep is a preparative electrophoresis platform for collection of size-selected DNA samples. The system automates DNA size selection using disposable, pre-cast agarose cassettes to extract fractions according to user-defined software input. Samples are electro-eluted from agarose and collected in buffer. The platform is used for the construction of next-gen sequencing libraries. The system collects fragments (depend…

Thar Instruments, makers of the TharSFC line of green chromatography Method Station system, is what most people describe as a methods development system for screening multiple compounds with multiple columns and multiple mobile phase compositions. The Analytical Supercritical Fluid Chromatography Method Station II features a smaller footprint despite a new larger Analytical–2–Prep Column Oven and expanded capacity high–speed…

Biochrom Libra S60 Double beam UV/Vis spectrophotometer Designed for busy multi-user laboratories needing scanning & secure methods 190-1100nm 2nm bandwidth Colour Touch screen display with easy to use software.USB ports for loading personal methods and transport data plus connection to a PC. All application software is built in - no extra modules to buyLong life Xenon lamp technology for low maintainance & cost of ownership…

Get best-in-class resolution, sensitivity, and throughput for even the most complex ICxIC (2D-IC) methods and trace level analyses. The versatile Thermo Scientific™ Dionex™ ICS-6000 Hybrid HPIC™ Systems provide faster separations without compromising resolution, thanks to its dual high-pressure channels. One channel is optimized for capillary flow rates, while the other is optimized for standard (4mm) or microbore (2mm) mod…

Features 158 litre Capacity.Economic Front Loading Autoclave.Heated from an external steam supply.Technical SpecificationDIMENSIONS Capacity: 158 litres front loading Chamber Dimensions (mm): 460 x 960 (diameter x depth) Export Packing Specifications (for shipping in mm): 1480 wide x 740 deep x 1580 high 1.73 cu metre. Weight: 370 Kg CYCLE PARAMETERS Timer: 0 to 119 minutes Temperature range: 100 to 137 deg.C. Maximum design…

The ChIPAb+ Acetyl-Histone H3 (Lys9) set includes the anti-acetyl-histone H3 (Lys9) antibody, a negative control antibody (purified Rabbit IgG), and qPCR primers flanking an Sp1 binding site in the human p21 (WAF1/CIP1/CDKN1A) promoter, amplifying a 105 base pair PCR product. The acetyl-histone H3 (Lys9) and negative control antibodies are supplied in a scalable "per ChIP" reaction size and can be used to functionally validate…

CHEMICON®'s Osteogenesis Quantitation Kit provides all the necessary reagents and a protocol to enable quantification of osteogenesis using a standard plate reader. This product is useful for studying the effects of growth factors, drugs and toxic agents on bone formation and for screening candidate osteogenic pharmaceuticals. Also, studies examining the intracellular signaling pathways regulating osteoblast differentiation ca…

5 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…

2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…

The Photomultiplier is a turnkey detector with a low noise, high sensitivity system that exceeds the performance of silicon photodiode systems over the wavelength range 185 to 800nm. It has a superior combination of a large, 8mm diameter, aperture and fast response of 10 microseconds. The convenient controller provides 11 gain seconds over an amplification range of 102 to 106 and includes a detector overvoltage protection circ…

The Ultra line represents Restek’s broadest selection of stationary phases on a single silica support. Made of high-purity, type-B silica that minimizes activity and creates high-density bonding, Ultra Silica Columns (USP L3) are designed for selective and reliable HPLC applications. Particle size: 3 μm or 5 μm, spherical Pore size: 100 Å End-cap: no pH range: 2.5 to 8 Temperature limit: 80 °C USP phase code: L3 Phase catego…

2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…

2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…

2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…

2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…

2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…

These 100 mL PYREX® Kjeldahl flasks have tooled finished necks for extra strength and uniform rubber stopper (No. 2) fit. Wall thickness is controlled to offer the optimum balance between thermal shock and chemical resistance. They can be used in ASTM E-258 procedures. Care must be taken to ensure the bottoms of the flasks do not come in contact with the heating elements. Most Kjeldahl equipment manufacturers have ring support…

These 300 mL PYREX® Kjeldahl flasks have tooled finished necks for extra strength and uniform rubber stopper (No. 5) fit. Wall thickness is controlled to offer the optimum balance between thermal shock and chemical resistance. They can be used in ASTM E-258 procedures. Care must be taken to ensure the bottoms of the flasks do not come in contact with the heating elements. Most Kjeldahl equipment manufacturers have ring support…