Products & ReviewGeneral Lab

AireGard ES (Energy Saver) NU-240 Bench Top Horizontal Laminar Airflow Workstation

Name: AireGard ES (Energy Saver) NU-240 Bench Top Horizontal Laminar Airflow Workstation
Rating: 0 (0 reviews)

AireGard model NU-240 is a bench top style with optional base stand Laminar Airflow Workstation (LAFW) that offers clean airflow per ISO 14644-1 for the preparation of injectable drugs, IV solutions, cell culture, semiconductors, and more. Product protection is created by providing ISO Class 5 air over the work zone in a unidirectional horizontal pattern.

0.0/5.0

|0 Reviews|Be the first to review this product

Request Pricing

Receive your quote directly from the manufacturer.

Ease of Use

After Sales Service

Value for Money

Be the first to leave a review

Description

Description

Brochures

Product brochuresGeneral Lab

Laminar airflow workstations

Learn more about NuAire Laminar Airflow Workstations (LAFW) for compounding sterile non-hazardous drugs and plant cell culture with this product brochure.

15 Sept 2019

Product Overview

AireGard ES (Energy Saver) NU-240 Bench Top Horizontal Laminar Airflow Workstation

NuAire, Inc.

0.0/5.0

|0 Reviews

Request Pricing

Links

NuAire, Inc.Manufacturer Website

Featured products

Request Quote for All Products

LabGard NU-813 Class I Biological Safety Cabinet
NuAire, Inc.
The LabGard NU-813 provides personnel protection for handling aerosols and particulate matter of low risk assessment though a 99.99% efficient HEPA filter. The Class I Safety cabinet allows room air to enter the hood, flowing past the operator into the work access opening. This provides an air barrier which minimizes contaminants generated within the hood work zone from migrating into the room.
(4)
LabGard NU-610 Dual-Access Class II Biological Safety Cabinet Animal Transfer Station
NuAire, Inc.
The LabGard NU-610 is a dual-access animal transfer station providing personnel, product, and environmental protection. The NU-610 was especially designed to allow two laboratory technicians additional control in handling small animals during sensitive cage transfers. The Dual-Access Biological Safety Cabinet offers the HEPEX Zero Leak Airflow System for true laminar airflow to minimize cross-contamination. The LabGard NU-610 can be built into a wall as a clean pass-through separating room from room.
(1)
PharmaGard ES (Energy Saver) NU-PR797 Compounding Aseptic Isolator
NuAire, Inc.
The PharmaGard PR797 creates a positive pressure clean air [ISO Class 5] controlled environment specifically for aseptic compounding of non-hazardous drugs. The HEPA filtered work area maintains a positive air pressure relative to the interchange compartment, which operates at a positive air pressure relative to the surrounding room. These two levels of protection minimize the possibility of contamination migrating into the work zone.
(3)
PharmaGard ES (Energy Saver) NU- NR800 Compounding Aseptic Containment Isolator
NuAire, Inc.
The PharmaGard NR797 creates a negative pressure clean air [ISO Class 5] re-circulating controlled environment for the aseptic compounding of hazardous drugs. The HEPA filtered work area maintains a negative air pressure relative to the interchange compartment, which operates at a negative air pressure relative to the surrounding room. These levels of protection minimize the possibility of chemotherapy agents or other hazardous materials migrating from the work area into the surrounding room as well as minimizing the possibility of contamination migrating into the work zone.
(0)
PharmaGard ES (Energy Saver) NU-NTE800 Compounding Aseptic Containment Isolator
NuAire, Inc.
The PharmaGard NTE797 creates a negative pressure clean air [ISO Class 5] total exhaust controlled environment for the aseptic compounding of hazardous drugs. The HEPA filtered work area maintains a negative air pressure relative to the interchange compartment, which operates at a negative air pressure relative to the surrounding room. These levels of protection minimize the possibility of chemotherapy agents or other hazardous materials migrating from the work area into the surrounding room as well as minimizing the possibility of contamination migrating into the work zone.
(0)
LabGard NU-125 Class II Walk-in Biological Safety Cabinet
NuAire, Inc.
The LabGard NU-125 provides Class II protection for personnel, product, and the environment. The room can be used for applications involving high-throughput robotic systems, large high-speed cell sorters, ultra-centrifuges, and laboratory equipment requiring Class II protection from potentially harmful aerosols and airborne particles. Applications: A perfect match for the BD FACS Aria Flow Cytometer Laboratory equipment or processes requiring sterility Class II Biological Safety Cabinet protection for robotics.
(0)
AutoLabGard ES NU-125 Mini-Room Class II, Type A2 Biosafety Cabinet
NuAire, Inc.
The AutoLabGard ES (Energy Saver) NU-125 Mini-Room is designed after a Class II, Type A2 Biological Safety Cabinet on a larger scale to provide Class II protection for personnel, product, and the environment. The mini-room can be used for applications involving high-throughput robotic systems, large high-speed cell sorters, ultra-centrifuges, and laboratory equipment requiring Class II protection from potentially harmful aerosols and airborne particles. The NU-125 AutoLabGard ES is constructed with an interior stainless steel floor and wall panels that are gasketed and bolted together. Painted exterior Cold Rolled Steel (CRS) cover panels are gasketed and bolted to the stainless wall panels that make up the negative pressure plenum. Painted CRS blower modules are mounted on top of the wall panels and contain both the supply and exhaust HEPA filters along with the ultra-high efficiency DC ECM motors. Stainless steel doors complete the cabinet enclosure with a hinged window assembly mounted on each door providing an 8 inch (203mm) access opening. If additional access is needed to the interior for user or system interfaces (i.e. power/computer cables, process tubing, etc.), negative pressure pass through ports may be added to the sides or rear of the enclosure that maintain enclosure containment. The airflow pattern of the NU-125 AutoLabGard ES is identical to any class II, type A2 biosafety cabinet. Room air is pulled into the cabinet through the work access opening at an average velocity of 105 fpm (.53 m/s) to provide an air barrier. Engineered with an ultra-high efficiency motor the AutoLabGard lowers operating costs by using less electricity and increasing filter life with less heat output. Each NU-125 is tested and comes with a certified copy to tests consistent with standard NSF/ANSI 49. Contact NuAire today to start your high-throughput robotic system enclosure consultation. Example Application: A perfect match for the BD FACS Airflow Cytometer Laboratory equipment or processes requiring sterility Class II Biological Safety Cabinet protection for robotics
(0)
In-VitroCell ES (Energy Saver) NU-5800
NuAire, Inc.
The In-VitroCell ES NU-5800 Direct Heat Laboratory CO2 Incubator is designed to provide a controlled in-vitro environment by providing the desired functionality needed to encourage cell culture growth for research at or near body temperature.
(3)
In-VitroCell ES NU-5810 Direct Heat CO2 Incubator with Dual Decontamination Cycles
NuAire, Inc.
The In-VitroCell ES NU-5810 Direct Heat CO2 Incubator with Dual Decontamination Cycles provides lab technicians a controlled in-vitro environment to grow cell tissue cultures.
(1)
In-VitroCell ES NU-5820 Direct Heat CO2 Incubator with Dual Decontamination Cycles and rH Control
NuAire, Inc.
The In-VitroCell CO2 Incubator model NU-5820 features humidity control through a relative humidity (RH) sensor and a water reservoir to minimize cell desiccation.
(0)
In-VitroCell ES NU-5831 Hypoxic Direct Heat CO2 Incubator with Dual Decontamination Cycles and O2 Control
NuAire, Inc.
The In-VitroCell NU-5831 is a Direct Heat Hypoxic CO2 Incubator that suppresses oxygen levels in the growth chamber.
(0)
In-VitroCell ES NU-5841 Hypoxic Direct Heat CO2 Incubator with Dual Decontamination Cycles, rH, and O2 Control
NuAire, Inc.
The In-VitroCell model NU-5841 is a direct heat CO2 incubator that features an RH sensor and water reservoir in place of a water pan to control the growth chamber's humidity levels to the setpoint.
(0)
LabGard ES (Energy Saver) NU-540 Class II, Type A2 Biological Safety Cabinet
NuAire, Inc.
The LabGard® ES NU‐540 Class II, Type A2 Laminar Flow Biological Safety Cabinet (LFBSC) is an effective primary engineering control in obtaining the optimum product quality while reducing the potential for exposure of both product and personnel to airborne biological or particulate chemical agents in low to moderate risk‐hazard research and drug preparation. The NU-540 offers economical operation through the use of an ultra high efficiency motor to maximize filter life and monolithic silicone-free construction for long product life.
(12)
LabGard ES (Energy Saver) NU-543 Class II, Type A2 Biological Safety Cabinet
NuAire, Inc.
LabGard® Air NU-543 Class II, Type A2 Biological Safety Cabinet offers the very best in personnel, product, and environmental protection by monitoring and controlling real-time airflow through the use of an airflow sensor, and displays airflow speeds on the OLED interface. The ability to choose up to three (3) different access opening heights allows our customers the option to select a larger access opening to improve technician movement and reach; select a smaller access opening to lower your total cost of ownership; or select somewhere in-between to get the best of both heights.
(1)
LabGard ES (Energy Saver) NU-677 Class II, Type A2 Animal Handling Biological Safety Cabinet
NuAire, Inc.
The LabGard™ ES NU-677 Class II, Type A2 Biological Safety Cabinet / Cage Changing Station offers sterility for animals, procedure work and bio-hazard containment for scientists and technicians; NSF listed to provide personnel, product and environmental protection for sensitive animal handling and cage changing procedures. The NU-677 can be either exhausted back into the room or connected to a facility HVAC system. The cabinet's airflow is 30% exhausted / 70% recirculated to minimize cross-contamination of low to moderate risk biologicals in the absence of volatile toxic chemicals.
(0)

AutoLabGard ES NU-125 Mini-Room Class II, Type A2 Biosafety Cabinet

NuAire, Inc.

The AutoLabGard ES (Energy Saver) NU-125 Mini-Room is designed after a Class II, Type A2 Biological Safety Cabinet on a larger scale to provide Class II protection for personnel, product, and the environment. The mini-room can be used for applications involving high-throughput robotic systems, large high-speed cell sorters, ultra-centrifuges, and laboratory equipment requiring Class II protection from potentially harmful aerosols and airborne particles. The NU-125 AutoLabGard ES is constructed with an interior stainless steel floor and wall panels that are gasketed and bolted together. Painted exterior Cold Rolled Steel (CRS) cover panels are gasketed and bolted to the stainless wall panels that make up the negative pressure plenum. Painted CRS blower modules are mounted on top of the wall panels and contain both the supply and exhaust HEPA filters along with the ultra-high efficiency DC ECM motors. Stainless steel doors complete the cabinet enclosure with a hinged window assembly mounted on each door providing an 8 inch (203mm) access opening. If additional access is needed to the interior for user or system interfaces (i.e. power/computer cables, process tubing, etc.), negative pressure pass through ports may be added to the sides or rear of the enclosure that maintain enclosure containment. The airflow pattern of the NU-125 AutoLabGard ES is identical to any class II, type A2 biosafety cabinet. Room air is pulled into the cabinet through the work access opening at an average velocity of 105 fpm (.53 m/s) to provide an air barrier. Engineered with an ultra-high efficiency motor the AutoLabGard lowers operating costs by using less electricity and increasing filter life with less heat output. Each NU-125 is tested and comes with a certified copy to tests consistent with standard NSF/ANSI 49. Contact NuAire today to start your high-throughput robotic system enclosure consultation. Example Application: A perfect match for the BD FACS Airflow Cytometer Laboratory equipment or processes requiring sterility Class II Biological Safety Cabinet protection for robotics

(0)

Brochures

Laminar airflow workstations

Product Overview

AireGard ES (Energy Saver) NU-240 Bench Top Horizontal Laminar Airflow Workstation

Links

Featured products

LabGard NU-813 Class I Biological Safety Cabinet

LabGard NU-610 Dual-Access Class II Biological Safety Cabinet Animal Transfer Station

PharmaGard ES (Energy Saver) NU-PR797 Compounding Aseptic Isolator

PharmaGard ES (Energy Saver) NU- NR800 Compounding Aseptic Containment Isolator

PharmaGard ES (Energy Saver) NU-NTE800 Compounding Aseptic Containment Isolator

LabGard NU-125 Class II Walk-in Biological Safety Cabinet

AutoLabGard ES NU-125 Mini-Room Class II, Type A2 Biosafety Cabinet

In-VitroCell ES (Energy Saver) NU-5800

In-VitroCell ES NU-5810 Direct Heat CO2 Incubator with Dual Decontamination Cycles

In-VitroCell ES NU-5820 Direct Heat CO2 Incubator with Dual Decontamination Cycles and rH Control

In-VitroCell ES NU-5831 Hypoxic Direct Heat CO2 Incubator with Dual Decontamination Cycles and O2 Control

In-VitroCell ES NU-5841 Hypoxic Direct Heat CO2 Incubator with Dual Decontamination Cycles, rH, and O2 Control

LabGard ES (Energy Saver) NU-540 Class II, Type A2 Biological Safety Cabinet

LabGard ES (Energy Saver) NU-543 Class II, Type A2 Biological Safety Cabinet

LabGard ES (Energy Saver) NU-677 Class II, Type A2 Animal Handling Biological Safety Cabinet

LabGard NU-813 Class I Biological Safety Cabinet

LabGard NU-610 Dual-Access Class II Biological Safety Cabinet Animal Transfer Station

PharmaGard ES (Energy Saver) NU-PR797 Compounding Aseptic Isolator

PharmaGard ES (Energy Saver) NU- NR800 Compounding Aseptic Containment Isolator

PharmaGard ES (Energy Saver) NU-NTE800 Compounding Aseptic Containment Isolator

LabGard NU-125 Class II Walk-in Biological Safety Cabinet

AutoLabGard ES NU-125 Mini-Room Class II, Type A2 Biosafety Cabinet

In-VitroCell ES (Energy Saver) NU-5800

In-VitroCell ES NU-5810 Direct Heat CO2 Incubator with Dual Decontamination Cycles

In-VitroCell ES NU-5820 Direct Heat CO2 Incubator with Dual Decontamination Cycles and rH Control

In-VitroCell ES NU-5831 Hypoxic Direct Heat CO2 Incubator with Dual Decontamination Cycles and O2 Control

In-VitroCell ES NU-5841 Hypoxic Direct Heat CO2 Incubator with Dual Decontamination Cycles, rH, and O2 Control

LabGard ES (Energy Saver) NU-540 Class II, Type A2 Biological Safety Cabinet

LabGard ES (Energy Saver) NU-543 Class II, Type A2 Biological Safety Cabinet

LabGard ES (Energy Saver) NU-677 Class II, Type A2 Animal Handling Biological Safety Cabinet