Incubator Orbital Shaker by Panasonic Biomedical Sales Europe BV

Incubator Orbital Shaker by Panasonic Biomedical Sales Europe BV product image
Incubator Orbital Shaker
Request Pricing

Receive your quote directly from the manufacturer.

0 Scientists have reviewed this product

Write the First Review

No Reviews

Design of Orbital Incubator Shaker
This Orbital Incubator Shaker is specifically designed as an incubator shaker for use in humidified incubators because this incubator shaker is humidity protected. The controller section of the shaking incubator is independent of the shaker section with connections being waterproof.

General Functions of the Orbital Incubator Shaker
Antibacterial copper alloy stainless steel is used for the shaker platform. Also, the shaker section is equipped with a small window that can be used for spraying decontaminating disinfectant inside.

Soft start: Orbital Incubator Shaker
The Incubator Shaker gradually accelerates until reaching the preset number of revolutions so that samples inside flasks and test tubes are not spilled, foamed or agitated excessively as to cause cell damage. Three levels of acceleration speed can be selected.

Timer: Orbital Incubator Shaker
If the timer function is selected, the controller Indicates the time of operation from 0 to 99.9 hours in increments of 0.1 hour (6 minutes).

Auto recovery after power interruption
The Incubator Shaker automatically recovers after a power interruption and indicates that a power interruption has occurred.

Speed and Speed error alarm: Incubator Shaker
The Incubator Shaker can be set to speeds between 40 and 200 rpm. The Speed error Alarm indicates an error when the number of revolutions does not reach or exceeds the preset value.

Motor overload protection circuit
Detects over-current and automatically stops operation. Indicates an error when overload is applied to the motor.

Maintenance-required indicator
Automatically alerts you when maintenance is required or when bearings and belts need replacing after the operational hours exceed 10,000.

Incubator Shaker Compatibility
The MIR-S100C Panasonic Incubator Shaker can be used with Panasonic Incubators MCO 17 / 18 / 19 and 20 series CO2 Incubators. The MIR-S100C Incubator Shaker could also be used in other manufacturers incubators if they are large enough and have an access hole.