Gas Generators and Analyzers > Gas Control Modules and Flow Meters Products & Reviews

The FlexStream™ is ideally suited for creating trace concentration – ppm, ppb, and pptr – mixtures. The FlexStream™ uses KIN-TEK Trace Source™ disposable, refillable and diffusion permeation tubes for over 500 Supported Chemicals.

Model: Check-Set II Cold and hot calibrator with two setpoints at 40 / 160 degrees F or at 5 / 90 degrees C Fits probes of various stem diameters Made in USA

Award winning 100 Series premium digital family is made up of our flagship Smart-Trak® Model 100, our highly engineered ultra low flow solution, the Micro-Trak™ Model 101, and our Max-Trak® Model 180 industrial product. Ideal for OEM's and end users alike, our family of digital mass flow instruments are defining a new breed of Performance MFC & MFM. Add the Compod™ programmable control module to all 100 Series models and get m…

AGC-100 is a single channel controller compatible with the FRG 7xx, PVG-5xx, PCG-75x and CDG-500 series of active gauges and automatically identifies the active gauge connected. AGD-100 is a low cost single channel display option for the FRG-700/702, PVG-5xx and PCG-75x series of active gauges. Both units have user selectable measurement unit (mbar, Torr, Pascal), and adjustable setpoint control.

Bold Line CO2 Unit, controls both air and CO2. The Bold Line Controllers can be operated as standalone units or in combination with each other through cabeless connection. Bold Line CO2 Unit Controller Features: Adds CO2 in Air or in N2 Range: 0-18% Accuracy: ± 5% of CO2 concentration, i.e. ± 0.25% at 5% CO2 Set Point Resolution: 0.1% Repeatability: better than 0.1% Total flow rate: 0.2-0.8 Nl/min Outlet press…

Bold Line O2 Unit Controller for Hypoxia. The Bold Line Controllers can be operated as standalone units or in combination with each other through cabeless connection. Bold Line O2 Unit [1-20] Features: O2 Concentration range: 1-20% Adds N2 to Air O2 Range: 1-20% Accuracy: ± 0.1% at 5% of O2 Repeatability: 0.05% of O2 Set Point Resolution: 0.1% Total flow rate: 0.2-0.8 Nl/min Outlet pressure: ambient N2 consu…

Bold LIne CO2 and O2 Unit [0-10;1-18]  controller for Hypoxia conditions. The Bold Line controllers can be operated as standalone units or in combination with each other through cabeless connection. Bold Line CO2 and O2 Unit [0-10;1-18] Controller Features: CO2 range: 0-10% - O2 range: 1-18% Adds CO2 and N2 to Air CO2 range: 0-10% O2 range: 1-18% CO2 accuracy: ± 5% of CO2 concentration, i.e. ± 0.25% at 5% CO2 O2…

Bold Line CO2 - O2 Unit [0-20;1-95] Contoller for Hypoxia and Hyperoxia. The Bold Line Controllers can be operated as standalone units or in combination with each other through cabeless connection.Bold Line CO2 - O2 Unit [0-20;1-95] Controller Features: CO2 range: 0-20% - O2 range: 1-95% Mixes CO2, O2 and N2 CO2 range: 0-20% O2 range: 1-95% CO2 accuracy: ± 0.3 % at 5% CO2 and 5% O2 O2 accuracy: ± 0.2% at 5% CO2 an…

Bold Line CO2 - O2 Unit [0-10;0-1] Controller for very low oxygen concentrations. The Bold Line Controllers can be operated as standalone units or in combination with each other through cabeless connection. Bold Line CO2 - O2 Unit [0-10;0-1] Controller Features:  CO2 range: 0-10% - O2 range: 0-1% Adds CO2 and Air to N2 CO2 range: 0-10% O2 range: 0-1% CO2 accuracy: ± 5% of CO2 concentration, i.e. ± 0.25% at 5% CO2…

Bold Line CO2 - O2 Unit CP Controller. This Gas Controller supplies desired Air-CO2 or N2-O2-CO2 mixture at controlled pressure. Bold Line CO2 - O2 Unit CP Controller Features: It replaces pre-mixed tanks One unit supplies up to 10 microscope incubators Ideal for imaging facilities Mixes two or three gas, according to operator's need Bold Line CO2 - O2 Unit CP Controller Technical Specifications: Operation mode…

  Includes: MPC2-ST & MPC2-HC - Multipoint double channel permeation calibrator MCSD-450-1500 - Dilution multipoint calibration station  

  LEMAN INSTRUMENTS study the development and production of instruments following the client’s specifications, based on standard physical modules and tested software. The following modules with their electronic control are available: Water electrolyzer H2-modules H2-purifyer Catalytic oven PSA AIR dryer and purifier PSA CO2 & moisture filter PSA N2 filter Permeation oven Gas mixer  

Total pressure vacuum gauge with analog signal outlet: Compact, durable and maintenance-friendly, minimized stray magnetic field.

The FTS ThermoJetTM & AirJet® XE systems deliver a stream of precisely controlled hot or cold air that can can be used for testing components, hybrids, modules, PCBs, and assemblies at temperature. The AirJet can also be used to cycle temperatures and is an ideal tool for a materials R&D laboratory. Air temperatures range from -80°C to +225°C, depending upon model. A special model, the XR exists for cooling test samples for NM…