Member since: 2019
Organization: University At Buffalo
Precise temp and CO2 level control.
Application Area: Cell culture
"Keeps culture moist. I cultured several cell lines and primary cells using this incubator."
Member since: 2017
Easy to use.
Application Area:C02 culture
"Easy to use, odor free, copper plate addition is a must. "
Member since: 2018
Organization: University of Exeter, CLES Biosciences, Lab211
Application Area:Essential equipment for our tissue cell culture facility
"Highly effective, HEPA air filters are an essential to have and the use is very easy. Cell lines were in good condition at all times, no contamination."
Member since: 2017
Organization: Pennsylvania State University College of Medicine
Easy to set up and great equipment
Application Area:Function test for cultured cell lines
"These incubators are great and very easy to set up. We have used them for almost 4 years and get no contamination at all. The temperature and CO2 concentration are all very stable. Furthermore, there is no big noise."
The In-VitroCell™ ES NU-5710 5.65 Ft3 (160 Liter) Direct Heat CO2 Incubator is designed to provide lab workers with a controlled in-vitro environment for growing tissue cell cultures. The NU-5710 provides optimum growth conditions via several parameters, including humidity, precise temperature control, precise CO2 control, sterility and reliability. The incubator's chamber can also be used for the preservation and storage of embryos, gametes and animal cell cultures intended for research at body temperature.
NuTouch Electronic Control System
The NU-5710 is equipped with the user-friendly NuTouch Electronic Control system, which is a touchscreen system that makes managing the incubator easy.
Designed for Contamination Control
To protect laboratory personnel and the products in the chamber, the incubator is engineered to keep contamination to a minimum. The NU-5710 offer dual sterilization cycles -- at 145°C dry and 95°C humidified.
The incubator has also been designed to minimize potential hiding places for contamination. It has coved corners and a crevice-free interior, which makes it easy to clean.
Closed Loop HEPA Filtration
For maximum contamination control, the NU-5710 incubator is designed with a closed loop HEPA filtration system. Using standards similar to an ISO Class 5 Clean Room, the incubator's filtration system is maintained at positive pressure while gas and air continuously pass through the 99.99-percent effective HEPA filters.
For product protection, the incubator has fewer moving parts, which means reduced vibration. Reducing vibration helps protect cell lines.
Fast Recovery Times
The NU-5710 incubator has faster recovery times after door openings for both temperature and CO2 gas.
A dual wave infrared (IR sensor) within the incubator maintains accurate CO2 levels in the growth chamber, which are accurate within ±0.1 percent, and it is insensitive to other components within the chamber, such as water vapor.
The incubator is able to maintain a uniform temperature, ±0.3°C, and this temperature is monitored using dual temperature probes, to ensure optimal product growth and health.
Simple Humidity Control
Humidity control in the NU-5710 is simple. The relative humidity level of up to 95 percent is achieved through the use of a stainless steel pan filled with distilled water no purer than 1 mega ohm, placed on the bottom of the chamber.