Brain Slice Chamber-2: Interface by AutoMate Scientific Inc.
Manufacturer AutoMate Scientific Inc.
* "Interface" method of slice maintenance* Dual feed channels for perfusion solution* Use entire surface for multiple slices or templates* Single and dual well templates, other designs available upon request* Single well template has provision for temperature probe and ground wire* Proportional temperature controller (PTC03) with low noise performance used for heating - available separatelyThis slice recording chamber is designed to maintain isolated, living tissues in vitro in "interface" mode ... Read more
.jpg.ashx?width=85&height=85)
.jpg)
Brain Slice Chamber-2: Interface
The supplier does not provide quotations for this particular product through SelectScience. You can search for similar products in our product directory.
* "Interface" method of slice maintenance
* Dual feed channels for perfusion solution
* Use entire surface for multiple slices or templates
* Single and dual well templates, other designs available upon request
* Single well template has provision for temperature probe and ground wire
* Proportional temperature controller (PTC03) with low noise performance used for heating - available separately
This slice recording chamber is designed to maintain isolated, living tissues in vitro in "interface" mode and allow stable electrophysiological recordings to be made from the preparation. The temperature is controlled by a proportional control heating unit (PTC03). Please order this item separately.
The chamber lower section is similar to the BSC-1 for temperature control and oxygenation. Pre-oxygenated medium enters the main body of the chamber through two separate lines. These are fine bore PTFE tubes which spiral in the heated distilled water in the lower part of the chamber and enter the upper part of the chamber. Here any bubbles in the line break and allow perfusion fluid to flow smoothly towards the slices. Acrylic templates allow the option for use of a single well or two separate wells.
* Dual feed channels for perfusion solution
* Use entire surface for multiple slices or templates
* Single and dual well templates, other designs available upon request
* Single well template has provision for temperature probe and ground wire
* Proportional temperature controller (PTC03) with low noise performance used for heating - available separately
This slice recording chamber is designed to maintain isolated, living tissues in vitro in "interface" mode and allow stable electrophysiological recordings to be made from the preparation. The temperature is controlled by a proportional control heating unit (PTC03). Please order this item separately.
The chamber lower section is similar to the BSC-1 for temperature control and oxygenation. Pre-oxygenated medium enters the main body of the chamber through two separate lines. These are fine bore PTFE tubes which spiral in the heated distilled water in the lower part of the chamber and enter the upper part of the chamber. Here any bubbles in the line break and allow perfusion fluid to flow smoothly towards the slices. Acrylic templates allow the option for use of a single well or two separate wells.
Product Overview
.jpg.ashx?width=270&height=270&bgcolor=ebebeb)
Brain Slice Chamber-2: Interface
Manufacturer AutoMate Scientific Inc.
Be the first to review this product